Indexing

https://scopedatabase.com/Sourceid/00000007

Scope Database

Our IAEME Publication journals are indexed in various indexing search engines

   The International Journal of Production technology and management (IJPTM) focuses on topics treating the interface between engineering and management. All aspects of the subject in relation to manufacturing and process industries, as well as production in general are covered. The journal is interdisciplinary in nature, considering whole cycles of activities, such as the product life cycle - research, design, development, test, launch, disposal - and the material flow cycle - supply, production, distribution.

  The ultimate objective of the journal is to disseminate knowledge for improving industrial practice and to strengthen the theoretical base necessary for supporting sound decision making. It provides a forum for the exchange of ideas and the presentation of new developments in theory and application, wherever engineering and technology meet the managerial and economic environment in which industry operates. In character, the journal combines the high standards of a traditional academic approach with the practical value of industrial applications.

Chief Editor

Dr. S. Nallusamy - Professor and Dean, Department of Mechanical Engineering, Dr. MGR Educational and Research Institute, India.


Managing Editor

Dr. Prof. Jose Arturo Garza-Reyes - Professor of Operations Management, University of Derby, UK.

Dr. N. Ramesh Babu - Professor, Department of Mechanical Engineering, IIT Madras, India.


Editorial Board

Dr. Barish Dantal - Application Development Engineer, Momentive Performance Materials, USA.

Dr. Mohamed Saber - National Research Center (NRC) El Dokki, Giza, Egypt.

Dr. H. N. Reddappa - Bangalore Institute of Technology, Karnataka, India.

Dr. Fateh Mebarek-Oudina - Skikda University, Algeria.

Dr. Audai Hussein Al-Abbas - Al-Musaib Technical College, Babylon, Iraq.

Dr. Mohd Azman Bin Abdullah - Universitiy Teknikal Malaysia Melaka, Malaysia.

Dr. T.R.Vijayaram - VIT University,Chennai.

Dr. M. Chithirai Pon Selvan - Amity University, Dubai.

Dr. Chao Wang - Nanyang Technological University, Singapore.

Dr. Madhu D - Govt. Engineering College, KRPET, India.

Dr. R. Dilli babu - Anna University, India.

Dr. A.Elaya perumal - Anna University, India.

Dr. Mohamed Kchaou - University Of Sousse, Tunisia.

Dr. Anan Suebsomran - King Mongkut’s University of Technology North Bangkok , Thailand.

Dr. A. G. Matani - Govt. College of Engineering, Amravati ,India.

Dr. Vivek Sachan - SHIATS, Allahabad, India

Dr. Pallavi.H.Agarwal - Babaria Institute of Technology, Gujarat, India

Prof. Raj Kumar Yadav - Adina Institute Of Science And Technology, Sagar, M.P

Dr. İlhan ASİLTÜRK - Selcuk University, Turkey

Dr. Sudarshan Rao K - Shri Madhwa Vadiraja Institute of Technology and Management, Karnataka, India

Dr. Kondaveeti Srinivasa Rao - CMR College of Engineering & Technology, Hyderabad, India

Dr. Ravi Burla - Autodesk Inc., Novi, MI

Dr. Jingchao Zhang - University of Nebraska-Lincoln,USA

Dr. Nilaj N. Deshmukh - Fr.C.Rodrigues Institute of Technology, India

Dr. Nilaj N. Deshmukh - Fr.C.Rodrigues Institute of Technology, India

Dr. Nadia MOUHIB - National School of Electricity and Mechanic MOROCCO

Dr. M. L. Meena - Malaviya National Institute of Technology, Jaipur, India

Dr. Raffi Mohammed - NRI Institute of Technology, Indian

Dr. Ajay Verma - Padmashri Dr. V.B. Kolte College of Engineering, Maharashtra, India

Dr. Sathish Rao U - Manipal University,Karnataka-India

Dr. Irfan. G - Akshaya Institute of Technology, Karnataka, India

Dr. Sunada Chakravarthy - Sunedison Inc, USA

Prof. S. Sathish Kumar - Vel Tech, Chennai, India

Dr. M. Ganesan - Saranathan College of Engineering, Trichy, India

Dr. CH V K N S N MOORTHY - Institute of Aeronautical Engineering(Autonomous), Telangana State, INDIA

Er. Anshul Singhal - Massachusetts Institute of Technology (MIT), USA

Dr. Ornella Chiavola - ROMA TRE University, Rome, Italy

Dr. H. Erdem Çamurlu - Akdeniz University, TÜRKİYE

Dr. GIRISHA L - PES Institute of Technology and Management, Karnataka, India

Dr. M. Mubarak - MEA Engineering College, Kerala, India

Dr. Ahmed Daabo - University of Mosul, Mosul, Iraq

Dr. Ambarish Maji - MLR Institute of Technology, India

Dr. Hao Yi - Chongqing University, China

Dr. Bambang Leo Handoko - Bina Nusantara University of Indonesia

Prof. Jaafar Jaber Abdulhameed - Almustansiririyah University, College of Engineering, Baghdad, Iraq

Dr. S A Mojhan Krishna - Associate Professor, Department of Mechanical Engineering, Vidyavardhaka College of Engineering, Mysuru, Karnataka, India.

Dr. Prateek Nigam - Bansal College of Engineering, Madhya Pradesh, India

Dr. Ehsaan Bagherian - Inspection Technology & Quality Assurance National Institute (ITQAN), Saudi Arabia

Dr. Mohamed KCHAOU - College of Engineering, University of Bisha, Saudi Arabia; National Engineering School of Sfax, University of Sfax, Tunisia

Dr. Shubham R Suryawanshi - MET’s Institute of Engineering, Bhujbal Knowledge City, Nashik, India

Dr. Diwan Mohit Balkrishna - Shankersinh Vaghela Bapu Institute of Technology, Gujarat India

Dr. Maryam Sadri - Sharif University of Technology and Aerospace Research Institute, Tehran-Iran.

Dr. A R Pradeep Kumar - Dhanalakshmi College of Engineering, Tamilnadu, India

Dr. Siamak Hosseinzadeh - University of Pretoria, Pretoria, South Africa

Dr. Eriki Ananda kumar - Associate Professor, Dept. of Mechanical Engineering, Faculty of Engineering, Science and Technology, Nilai University, Malaysia

Dr. Dhanasekaran S - Annamalai University, Tamil Nadu, India

Dr. Basanta Kumar Bhuyan - Professor, MNNIT Allahabad, FET-MRIIRS, Faridabad, India.

Prof. Pavlo Maruschak - Vice-Rector for Scientific Research of Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine.

Dr. T. Kamatchi - Associate Professor, Mechanical Department, Velammal College of Engineering and Technology, Tamilnadu, India.

Dr. P. Vivek - Head of the Department, Department of Automobile Engineering, Annapoorana Engineering College, Salem, Tamilnadu, India


Reviewer Board

Dr. K.S.Zakiuddin - Priyadarshini College of Engineering, India

Dr. R.Edison Chandraseelan - SMKFIT,India

Dr. Syed Anisuddin - Caledonian College of Engineering, Sultanate of Oman

Er. Vinod Singh Yadav - MNIT, India

Dr. S.Sreenatha Reddy - Universal College of Engineering and Technology, India

Dr. M. Victor Raj - Sardar Raja College of Engineering, India

Dr. V.Baskaran - Bannari Amman Institute of Technology, India

Dr. Ratri Parida - IIT Kharagpur, India

Dr. G.Kalivarathan - PSN Institute of Technology and Science,India

Er. N.Vijayponraj - PSN Institute of Technology and Science, India

Dr. R.Uday Kumar - Mahatma Gandhi Institute of Technology, India

Prof. Manikandapirapu P.K - Dayananda Sagar College of Engineering, India

Dr. Srinivasa G.R - Dayananda Sagar College of Engineering, India

Dr. Sudhakar K.G - K L University, India

Dr. Chavan Dattatraya K. - MMCOE, Karvenagar, Pune

Dr. Rahul Davis - SHIATS-DU, Allahabad

Prof. Potnuru Govinda Rao - GMR Institute of Technology,Rajam

Dr. Velamala Rambabu - G.M.R.Institute of Technology,Rajam

Dr. V. Chitti Babu - GMR Institute of Technology, Rajam, A.P

Dr. Ravindra D. Jilte - Vidyavardhini’s College of Engineering and Technology,MSQ

Dr. Gurudutt Sahni - DGM & HOD Leader Valves Ltd, Punjab, India


For Authors

Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system. Submissions by anyone other than one of the authors will not be accepted.
Regardless of the source of the word-processing tool, only electronic PDF or MS-Word files can be submitted through the online submission system. If for some technical reason online submission is not successful, the author can submit the manuscript to editor@iaeme.com.

Paper title (14 Bold)- Capital Letter

First Author1, Second Author2 (13 Bold- Times New Roman)

1(Department, College/ University Name, Address, Country Name, Email) (12)

2(Department, College/ University Name, Address, Country Name, Email) (12)

ABSTRACT (12 Bold)

The abstract should summarize the content of the paper. Try to keep the abstract below 350 words. Do not make references nor display equations in the abstract. The journal will be printed from the same-sized copy prepared by you. Your manuscript should be printed on A4 paper (21.0 cm x 29.7 cm). It is imperative that the margins and style described below be adhered to carefully. This will enable us to keep uniformity in the final printed copies of the Journal. Please keep in mind that the manuscript you prepare will be photographed and printed as it is received. Readability of copy is of paramount importance.(12)

Keywords (12 Bold) : About five key words in alphabetical order, separated by comma (12)

I. INTRODUCTION (12 BOLD)

The introduction of the paper should explain the nature of the problem, previous work, purpose, and the contribution of the paper. The contents of each section may be provided to understand easily about the paper. (12)

II. HEADINGS (12 BOLD)

The headings and subheadings, starting with "1. Introduction", appear in upper and lower case letters and should be set in bold and aligned flush left. All headings from the Introduction to Acknowledgements are numbered sequentially using 1, 2, 3, etc. Subheadings are numbered 1.1, 1.2, etc. If a subsection must be further divided, the numbers 1.1.1, 1.1.2, etc.

The font size for heading is 12 points bold face and subsections with 12 points and not bold. Do not underline any of the headings, or add dashes, colons, etc. (12)

III. INDENTATIONS AND EQUATIONS(12 BOLD)

The first paragraph under each heading or subheading should be flush left, and subsequent paragraphs should have a five-space indentation. A colon is inserted before an equation is presented, but there is no punctuation following the equation. All equations are numbered and referred to in the text solely by a number enclosed in a round bracket (i.e., (3) reads as "equation 3"). Ensure that any miscellaneous numbering system you use in your paper cannot be confused with a reference [4] or an equation (3) designation. (12)

IV. FIGURES AND TABLES(12 BOLD)

To ensure a high-quality product, diagrams and lettering MUST be either computerdrafted or drawn using India ink.

Figure captions appear below the figure, are flush left, and are in lower case letters.When referring to a figure in the body of the text, the abbreviation "Fig." is used. Figures should be numbered in the order they appear in the text.

Table captions appear centered above the table in upper and lower case letters. When referring to a table in the text, no abbreviation is used and "Table" is capitalized. (12). Figures and tables should be included in the running text itself

V. CONCLUSION (12 BOLD)

A conclusion section must be included and should indicate clearly the advantages, limitations, and possible applications of the paper. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extentions. (12)

VI. ACKNOWLEDGEMENTS(12 Bold)

An acknowledgement section may be presented after the conclusion, if desired.( 12)

REFERENCES (12 BOLD)

This heading is not assigned a number.

A reference list MUST be included using the following information as a guide. Only cited text references are included. Each reference is referred to in the text by a number enclosed in a square bracket (i.e., [3]). References must be numbered and ordered according to where they are first mentioned in the paper, NOT alphabetically.

Examples follow:

ournal Papers:

[1] M Ozaki, Y. Adachi, Y. Iwahori, and N. Ishii, Application of fuzzy theory to writer recognition of Chinese characters, International Journal of Modelling and Simulation, 18(2), 1998, 112-116. (12)

Books:

[2] R.E. Moore, Interval analysis (Englewood Cliffs, NJ: Prentice-Hall, 1966). (12) Note that the title of the book is in lower case letters and italicized. There is no comma following the title. Place of publication and publisher are given.

Chapters in Books:

[3] P.O. Bishop, Neurophysiology of binocular vision, in J.Houseman (Ed.), Handbook of physiology, 4 (New York: Springer-Verlag, 1970) 342-366. (12) Note that the place of publication, publisher, and year of publication are enclosed in brackets. Editor of book is listed before book title.

Theses:

[4] D.S. Chan, Theory and implementation of multidimensional discrete systems for signal processing, doctoral diss., Massachusetts Institute of Technology, Cambridge, MA, 1978. (12)

Proceedings Papers:

[5] W.J. Book, Modelling design and control of flexible manipulator arms: A tutorial review, Proc. 29th IEEE Conf. on Decision and Control, San Francisco, CA, 1990, 500-506 (12)

Manuscripts not adhering to journal guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. The review process is double blind. The Editor prepares a decision letter according to the comments of the reviewers, which is sent to the corresponding author. All non-reviewed manuscripts are sent back within 10 days and the decision letters of manuscripts are sent within 4 weeks.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, CC BY (or the Creative Commons Attribution-NonCommercial License CC BY-NC), which allows users to (noncommercially) copy, use, distribute, transmit and display the work publicly and to make and distribute derivative works, in any digital medium for any responsible purpose, subject to proper attribution of authorship.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
IAEME Publication is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance..
IAEME Publication follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct.
Please find more general information for authors on the page: Information for Authors.

IAEME Publication Fees


IAEME Publication charges an Article Processing Charge (APC) once an article is accepted for publication. These charges cover the costs of turning a manuscript into a finished article, as well as the costs of hosting, distributing and promoting an article.

Article Processing Charges explained

We are committed to making the costs of publishing as clear as possible and so the charges for each journal are clearly displayed on each journal`s homepage.

When a manuscript is submitted, it passes through the many different departments at Hindawi to ensure the quality checks, peer review, production and promotion of articles is carried out in a timely manner and to a high standard:

✔ The Editorial Screening team, who perform initial technical and ethical checks

✔ The Editorial team, who help the journal`s Academic Editors manage the review process

✔ The Production team, who convert the manuscript to a professionally typeset article and well-structured file format

✔ The Proofing team, who coordinate the proofing process through Hindawi`s Online Proofing System (OPS)

✔ The Editorial Quality Assurance team, who perform a final check to ensure that the manuscript and its review process adhere to the journal`s guidelines and policies

✔ Our Marketing and Communication teams, who ensure your article receives the attention it deserves.

✔ The Technology team, who build and maintain our systems, and develop new systems

The work these teams do contribute to the requirement of an APC and is why the actual amount payable varies depending on the journal in which you wish to publish your article.

IAEME Publication does not request Article Submission Charges, also called Submission Fees. These are due at the time of submission of the manuscript. Nor does IAEME charge per page or for color figures or for any other items for which other publishers are known to charge.

Sources for Article Processing Charges (APC)

Authors of an article are responsible for arranging the payment of APC. Still, that typically does not mean that authors end up paying for the publication of the article. The cost of APC is very often assumed either by the organization funding the research published in the article, or by an Open Access Publishing Fund, or by the institution at which the author is employed.

Fair Dealing - Authors and Publisher

When an author submits a manuscript for review at one of IAEME`s journals, the submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. The manuscript should also not be submitted to any other journal during the review process at IAEME Publication. In case the review process at IAEME takes much longer than stated and the author wishes to end the review process at IAEME, he/she should get in contact with the Editorial Assistant of the journal at IAEME and come to an agreement suitable for both sides after looking at the stage of the manuscript in the review process.

With the APC specified above, the author is given an indication what the APC will be. IAEME is charging Publication Fees (APC) but not Submission Fees. This is to the benefit to authors because payments are only due once the author knows the manuscript is accepted. IAEME with editors and reviewers puts much effort in dealing with the manuscript and expects the authors to stick to the common plan of publishing the paper which is linked to payments of APC as given above at the end of the review process. The author is not legally bound at this time, but it would be seen as a strong breach of academic conduct to back off from the publication process. Once the manuscript is accepted for publication, IAEME will issue an invoice in the Paper Submission and Manuscript Tracking System. This is IAEME `s legal offer and will state the regular APC of the journal. The Corresponding Author is expected to arrange payments of the amount stated at this time. In severe cases IAEME `s Complaints Procedure can be followed and the result of this should be binding to the author.

Refund Policy

Once an article has been accepted for publication, any Article Processing Charges on the article become due. The submitting author accepts responsibility for the Article Processing Charges, and will not issue refunds of any kind except those payments made by mistake or in excess of the amount required.

  • International Journal of Production Technology and Management (IJPTM) covers the full range of advanced manufacturing technology. It therefore publishes papers on robotics; artificial intelligence
  • including speech technology
  • vision and tactile sensing; grippers; programmable controllers; lasers and other advanced processes; programmable assembly; flexible manufacturing systems; computer integrated manufacturing; inspection; automatic test equipment; simulation; motors
  • controls and drives; local area networking; production planning and control; logistics and supply chain management; human factors; and economics.

IJPTM Journal Stats

Publication years 2010-2020
Publication count 85
Total Volumes 11
Total Issues 15
Citation count
h-index
i5-index
Impact Factor
Downloads
Views
Downloads/article
Citations/article

Journal Statistics

Citation Analysis

scopedatabase.com


Related Journals


Create Account



Log In Your Account



Body: