International Journal of Electrical Engineering and Technology (IJEET) is indexed in Scope Database from 2010 to 2021

Please click the following link to see the Details

Web of Science (Clarivate Analytics)

Total citation of 31 from IJEET Journal published from 2010 to 2021

Please click the following link to see the Details


Total citation of 38 from IJEET Journal published from 2010 to 2021

Please click the following link to see the Details

Google Scholar

Total citation of 1226 from IJEET Journal published from 2010 to 2021

University of Barcelona - MIAR - Information Matrix for the Analysis of Journals


Please click the following link to see the Details

Scope Database Source Link:

MIAR - Information Matrix for the Analysis of Journals:

Our IAEME Publication journals are indexed in various indexing search engines given below

Aim and Scope
     International Journal of Electrical Engineering and Technology (IJEET) is a peer-reviewed, Online and Print journal published by IAEME Publication.
    The International Journal of Electrical Engineering and Technology (IJEET) is an international scholarly journal which publishes original research findings in power generation, transmission and conversion, electrical machinery, control theory and industrial controls, robotics, electrical transportation equipment, insulation, solar energy, high-power semiconductors, as well as economic and environmental aspects of energy production and distribution

Chief Editor

Dr. P. Sanjeevikumar

Aalborg University, Aalborg, Denmark

Editorial Board:

Dr. T Ananthapadmanabha

Principal, NIE Institute of Technology, Mysuru, India

Dr. Mohamed I. El-sayed

Faculty of Engineering (Grails), Al-Azhar University, Cairo, Egypt

Dr. S.Sankar

Panimalar Institute of Technology, India

Dr. Anshul Agarwa

National Institute of Technology Hamirpur, India

Dr. M V Raghavendra

Adama Science & Technology University, Ethiopia

Dr. Javed Khan Bhutto

Marudhar Engineering College, India

Dr. V. Balaji

Lord Ayyappa Institute of Engineering and Technology, India

Dr. C. Subramani

SRM University, India

Dr. R. Dhanasekaran

Syed Ammal Engineering College, Tamilnadu, India

Dr. N M Lokhande

K J College Of Engg and Management Research, Pune, India

Dr. A.Senthil Kumar

Velammal Engineering College, Chennai, India

Dr. Naushad Alam

Aligarh Muslim University Aligarh, India

Dr. Aldona Kuśmińska-Fijałkowska

Kazimierz Pulaski University of Technology and Humanities, Poland

Dr. SM Shashidhar

Proudhadevaraya Institute of Technology, Ballari, Karnataka, India

Dr. K. Swarnasri

R. V. R. & J. C. College of Engineering, India

Dr. Waldemar Nowakowski

Kazimierz Pulaski University of Technology and Humanities, Poland

Dr. Jacek Kozyra

Kazimierz Pulaski University of Technology and Humanities, Poland

Dr. D. Obulesu

Vemu Institute of Technology, Andhrapradesh, India

Dr. Selvarasu Ranganathan

Sree Vidyanikethan Engineering College, Tirupathi, India

Dr. Mourad Hebali

University Mustafa Stmboli, Algeria

Dr. C.Govindaraju

Government College of Engineering, Tamilnadu, India

Dr. Puttamadappa C

Dayananda Sagar University, Bangalore, India

Dr. M.G.Siddh

Gujarat Technological University Gujarat, India

Dr. P.C.Panda

KIIT University, Bhubaneswar, India

Dr. Afaf Ahmed Abed

Al Furat Al Awsat Technical University, Kufa, Iraq

Dr. M. RathinaKumar

Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya University, Tamilnadu, India

Dr. Sheeraz Kirmani

Jamia Millia Islamia, New Delhi, India

Dr. L.S.Nasrat

Aswan University, Aswan, Egypt

Dr. V. N. Gohokar

Marathawada Mitramandal College of Engineering, Pune, India

Dr. V.C. Veera Reddy

S.V.U. College of Engineering, Tirupati, India

Dr. D. Bhagwan Das

Dayalbagh Educational Institute (Deemed University), Agra, India

Dr. P.S.Subramanyam

Vignana Bharathi Institute of Technology, Hyderabad, India

Dr. R. Alkama

University of Bejaia, Algeria

Dr. T. Nageswara Prasad

S.V.U. College of Engineering, Tirupati, India

Dr. E.Maheswari

Sri Sairam Institute of Technology, Chennai, India

Dr. Ganga Agnihotri

MANIT Bhopal, India

Dr. M. Surya Kalavathi

JNTU College of Engineering, Hyderabad, India

Dr. Subir Datta

Mizoram University, Mizoram, India

Dr. Sanjay Lakshminarayanan

M S Ramaiah Institute of Technology, Bangalore-India

Dr. H. Mellah

Sétif 1University, Sétif, Algeria

Dr. Sumita Deb

Tripura University, Tripura, India

Dr. C.K.Panigrahi

KIIT University, Odisha, India

Dr. A. Selwin Mich Priyadharson

Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India

Dr. S.S.Sivaraju

RVS College of Engineering and Technology, Coimbatore, India

Dr. V.Ranganayaki

Dr.N.G.P Institute of Technology, Tamilnadu, India

Dr. M.Rajmal Joshi

Panimalar Engineering College, Tamilnadu, India

Dr. Navid Razmjooy

Tafresh University, Iran

Dr. P. Selvaraj

S V Engineering College, Tirupati, Andhra Pradesh, India

Dr. Jesús M. Blanco

University of the Basque Country, Spain

Dr. Zhen Fang

Chinese Academy of Sciences, China

Dr. Herbert H. C. Iu

The University of Western Australia, Australia

Dr. Marc A. Rosen

University of Ontario Institute of Technology, Canada

Dr. Federico Scarpa

University of Genoa, Italy

Dr. V. V. Karthikeyan

Karpagam College of Engineering, India

Dr. Russell Binions

University of London, UK

Dr. Roulet Claude-Alain

Ecole Polytechnique Federale de Lausanne, Switzerland

Dr. Massimo Corcione

University of Rome, Italy

Dr. Zainuddin Abdul Manan

Universiti Teknologi Malaysia, Malaysia

Dr. Randy W. Mann

Global Foundries, USA

Dr. Nikos Sakkas

Technological and Educational Institute of Crete, Greece

Dr. Shaik Rafi Kiran

Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India

Dr. Rajesh Agarwal

Assistant Professor, Department of Electronics and Communication Engineering, SRM IST, Chennai, India.

Dr. A.N. Jha

Department of Electrical Engineering, Indian Institute of Technology, New Delhi, India

Prof. Joydeep Bhattacharyya

Senior Technical Leader and Architect at Data Center Group, Intel Corporation, San Jose, USA

Dr. S. Jaganathan

Professor and Head, Department of EEE, Dr.N.G.P. Institute of Technology, Coimbatore, Tamilnadu, India

Dr. Ravindran Mariappan

Associate Professor (SG), Electrical and Electronics Engineering Department, National Engineering College, Kovilpatti, Tamilnadu, India

Prof. Uma Govindarajan

Professor & Head of Electrical and Electronic Engineering Department, College of Engineering Guindy, Anna University, Tamil Nadu, India

Prof. Vijayalakshmi Vivekananda

Pondicherry Engineering College (PEC), Pondicherry, India

Dr. Mohd Aliff Afira Bin Hj. Sani

Instrumentation and Control Engineering, Malaysian Institute of Industrial Technology, Universiti Kuala Lumpur, Malaysia

Dr. Mohd Aliff Afira Bin Hj. Sani

Instrumentation and Control Engineering, Malaysian Institute of Industrial Technology, Universiti Kuala Lumpur, Malaysia

Dr. G. Emayavaramban

Assistant Professor, Karpagam Academy of Higher Education, Coimbatore, Tamil Nadu,India

Dr. J.B. Seventiline

Professor and Assistant Principal of GITAM Institute of Technology under GITAM, Gandhi Nagar, Rushikonda, Visakhapatnam, Andhra Pradesh 530045.

Dr. R.Neela

Professor of Electrical Engineering, Annamalai University, Tamilnadu, India.

Prof. L. Premalatha

Department of Electrical Engineering, VIT University, Chennai, India

Dr. MaruthuPandi Perumal

Assistant Professor, Department of Electrical and Electronics Engineering, Govt. College of Technology, Coimbatore, Tamilnadu, India

Prof. Jialin Chen

Electrical Engineering, State Grid Hubei Information & Telecommunication Co. Ltd., Hongshan, Wuhan,China.

Dr. Belwin Edward Jeyaraj

Associate Professor, School of Electrical Engineering ,Vellore Institute of Technology (VIT), Vellore, Tamilnadu, India

Prof. Balakrishnan Pappan

Associate Professor, Department of Electrical Engineering, Malla Reddy Engineering College for Women, Maisammaguda, Telangana, India

Dr. Umapathi Reddy P

Professor, Department of Electrical Engineering, Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India

Dr. Kiranmayi R

Professor & Head of Department, Department of Electrical Engineering, JNTUA, Anantapur, Andhra Pradesh, India

Dr. S. Sophia

Professor and Head, Department of Electronics and Communication Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, Tamilnadu, India

Dr. Sarfaraz Nawaz

Associate Professor, Department of Electrical Engineering, Swami Keshvanand Institute of Technology, Management & Gramothan, Rajasthan, India

Dr. K. Radha Rani

Professor, EEE Department, R.V.R & J.C. College of Engineering, Andhra Pradesh, India

Dr. AshokKumar Ramaswamy

Professor, Department of Electrical Engineering, Annamalai University, Tamil Nadu, India

Dr. Annapurani Panaiyappan K

Associate Professor, Department of Computer Science and Engineering, SRM Institute of Science and Technology, Kattankulathur, India

Email :
Institutional Profile :
Google Scholar :
Publon :
Research Gate :

Dr. S.P. Shukla

Professor, Department of Electrical Engineering, Bhilai Institute of Technology, Durg, Chhattisgarh, India

Email :
Institutional Profile :

Mr. Mahesh Tunguturi

Sr.Software Engineer, DXC Technology, USA

Email :

Dr. Ashok Kumar Reddy Nadikattu

Researcher/Sr.Software Engineer, Arissoft Solutions, USA

Email :

Mr. Sai Teja Makani

Senior Manager, Dev Ops, Spotter Inc, Allentown, PA, USA

Mr. Venkata Ravi Kiran Kolla

Sr. Researcher and Sr. Software Engineer, Department of Information Technology, USA

For Authors

Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system. Submissions by anyone other than one of the authors will not be accepted.
Regardless of the source of the word-processing tool, only electronic PDF or MS-Word files can be submitted through the online submission system. If for some technical reason online submission is not successful, the author can submit the manuscript to

Paper title (14 Bold)- Capital Letter

First Author1, Second Author2 (13 Bold- Times New Roman)

1(Department, College/ University Name, Address, Country Name, Email) (12)

2(Department, College/ University Name, Address, Country Name, Email) (12)

ABSTRACT (12 Bold)

The abstract should summarize the content of the paper. Try to keep the abstract below 350 words. Do not make references nor display equations in the abstract. The journal will be printed from the same-sized copy prepared by you. Your manuscript should be printed on A4 paper (21.0 cm x 29.7 cm). It is imperative that the margins and style described below be adhered to carefully. This will enable us to keep uniformity in the final printed copies of the Journal. Please keep in mind that the manuscript you prepare will be photographed and printed as it is received. Readability of copy is of paramount importance.(12)

Keywords (12 Bold) : About five key words in alphabetical order, separated by comma (12)


The introduction of the paper should explain the nature of the problem, previous work, purpose, and the contribution of the paper. The contents of each section may be provided to understand easily about the paper. (12)


The headings and subheadings, starting with "1. Introduction", appear in upper and lower case letters and should be set in bold and aligned flush left. All headings from the Introduction to Acknowledgements are numbered sequentially using 1, 2, 3, etc. Subheadings are numbered 1.1, 1.2, etc. If a subsection must be further divided, the numbers 1.1.1, 1.1.2, etc.

The font size for heading is 12 points bold face and subsections with 12 points and not bold. Do not underline any of the headings, or add dashes, colons, etc. (12)


The first paragraph under each heading or subheading should be flush left, and subsequent paragraphs should have a five-space indentation. A colon is inserted before an equation is presented, but there is no punctuation following the equation. All equations are numbered and referred to in the text solely by a number enclosed in a round bracket (i.e., (3) reads as "equation 3"). Ensure that any miscellaneous numbering system you use in your paper cannot be confused with a reference [4] or an equation (3) designation. (12)


To ensure a high-quality product, diagrams and lettering MUST be either computerdrafted or drawn using India ink.

Figure captions appear below the figure, are flush left, and are in lower case letters.When referring to a figure in the body of the text, the abbreviation "Fig." is used. Figures should be numbered in the order they appear in the text.

Table captions appear centered above the table in upper and lower case letters. When referring to a table in the text, no abbreviation is used and "Table" is capitalized. (12). Figures and tables should be included in the running text itself


A conclusion section must be included and should indicate clearly the advantages, limitations, and possible applications of the paper. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extentions. (12)


An acknowledgement section may be presented after the conclusion, if desired.( 12)


This heading is not assigned a number.

A reference list MUST be included using the following information as a guide. Only cited text references are included. Each reference is referred to in the text by a number enclosed in a square bracket (i.e., [3]). References must be numbered and ordered according to where they are first mentioned in the paper, NOT alphabetically.

Examples follow:

ournal Papers:

[1] M Ozaki, Y. Adachi, Y. Iwahori, and N. Ishii, Application of fuzzy theory to writer recognition of Chinese characters, International Journal of Modelling and Simulation, 18(2), 1998, 112-116. (12)


[2] R.E. Moore, Interval analysis (Englewood Cliffs, NJ: Prentice-Hall, 1966). (12) Note that the title of the book is in lower case letters and italicized. There is no comma following the title. Place of publication and publisher are given.

Chapters in Books:

[3] P.O. Bishop, Neurophysiology of binocular vision, in J.Houseman (Ed.), Handbook of physiology, 4 (New York: Springer-Verlag, 1970) 342-366. (12) Note that the place of publication, publisher, and year of publication are enclosed in brackets. Editor of book is listed before book title.


[4] D.S. Chan, Theory and implementation of multidimensional discrete systems for signal processing, doctoral diss., Massachusetts Institute of Technology, Cambridge, MA, 1978. (12)

Proceedings Papers:

[5] W.J. Book, Modelling design and control of flexible manipulator arms: A tutorial review, Proc. 29th IEEE Conf. on Decision and Control, San Francisco, CA, 1990, 500-506 (12)

Manuscripts not adhering to journal guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. The review process is double blind. The Editor prepares a decision letter according to the comments of the reviewers, which is sent to the corresponding author. All non-reviewed manuscripts are sent back within 10 days and the decision letters of manuscripts are sent within 4 weeks.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, CC BY (or the Creative Commons Attribution-NonCommercial License CC BY-NC), which allows users to (noncommercially) copy, use, distribute, transmit and display the work publicly and to make and distribute derivative works, in any digital medium for any responsible purpose, subject to proper attribution of authorship.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
IAEME Publication is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance..
IAEME Publication follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct.
Please find more general information for authors on the page: Information for Authors.

IAEME Publication Fees

IAEME Publication charges an Article Processing Charge (APC) once an article is accepted for publication. These charges cover the costs of turning a manuscript into a finished article, as well as the costs of hosting, distributing and promoting an article.

Article Processing Charges explained

We are committed to making the costs of publishing as clear as possible and so the charges for each journal are clearly displayed on each journal`s homepage.

When a manuscript is submitted, it passes through the many different departments at Hindawi to ensure the quality checks, peer review, production and promotion of articles is carried out in a timely manner and to a high standard:

✔ The Editorial Screening team, who perform initial technical and ethical checks

✔ The Editorial team, who help the journal`s Academic Editors manage the review process

✔ The Production team, who convert the manuscript to a professionally typeset article and well-structured file format

✔ The Proofing team, who coordinate the proofing process through Hindawi`s Online Proofing System (OPS)

✔ The Editorial Quality Assurance team, who perform a final check to ensure that the manuscript and its review process adhere to the journal`s guidelines and policies

✔ Our Marketing and Communication teams, who ensure your article receives the attention it deserves.

✔ The Technology team, who build and maintain our systems, and develop new systems

The work these teams do contribute to the requirement of an APC and is why the actual amount payable varies depending on the journal in which you wish to publish your article.

IAEME Publication does not request Article Submission Charges, also called Submission Fees. These are due at the time of submission of the manuscript. Nor does IAEME charge per page or for color figures or for any other items for which other publishers are known to charge.

Sources for Article Processing Charges (APC)

Authors of an article are responsible for arranging the payment of APC. Still, that typically does not mean that authors end up paying for the publication of the article. The cost of APC is very often assumed either by the organization funding the research published in the article, or by an Open Access Publishing Fund, or by the institution at which the author is employed.

Fair Dealing - Authors and Publisher

When an author submits a manuscript for review at one of IAEME`s journals, the submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. The manuscript should also not be submitted to any other journal during the review process at IAEME Publication. In case the review process at IAEME takes much longer than stated and the author wishes to end the review process at IAEME, he/she should get in contact with the Editorial Assistant of the journal at IAEME and come to an agreement suitable for both sides after looking at the stage of the manuscript in the review process.

With the APC specified above, the author is given an indication what the APC will be. IAEME is charging Publication Fees (APC) but not Submission Fees. This is to the benefit to authors because payments are only due once the author knows the manuscript is accepted. IAEME with editors and reviewers puts much effort in dealing with the manuscript and expects the authors to stick to the common plan of publishing the paper which is linked to payments of APC as given above at the end of the review process. The author is not legally bound at this time, but it would be seen as a strong breach of academic conduct to back off from the publication process. Once the manuscript is accepted for publication, IAEME will issue an invoice in the Paper Submission and Manuscript Tracking System. This is IAEME `s legal offer and will state the regular APC of the journal. The Corresponding Author is expected to arrange payments of the amount stated at this time. In severe cases IAEME `s Complaints Procedure can be followed and the result of this should be binding to the author.

Refund Policy

Once an article has been accepted for publication, any Article Processing Charges on the article become due. The submitting author accepts responsibility for the Article Processing Charges, and will not issue refunds of any kind except those payments made by mistake or in excess of the amount required.

Subject Area
The topics to be covered by this journal include but are not limited to the following fields:
• Electric Power Engineering
• Power System Security & Risk Analysis
• Power System Computational Analysis
• Power System Dynamics & Control
• Power System Reliability
• Power System Operations
• Power Distribution System
• Electric Machinery
• Machine and Special Machine
• Power Electronics
• Advanced Technology for Electrical Transportation
• Renewable Energy System
• Motor Drive & Control
• Electric Material and Semiconductor
• High Power and High Voltage
• Robotics and Automation
• Electrical Facilities-Technical Standard & Design and Supervision
• Electric Construction Technology
• Electric Safety Technology
• Electric Railway System

IJEET Journal Stats

Publication years 2010-2023
Publication count 1357
Total Volumes 14
Total Issues 96
Downloads 153508
Views 319721
Downloads/article 113.12

Journal Statistics

Citation Analysis

Scopus Source Link
Google Scholar
Research Bible

Related Journals

Create Account

Log In Your Account