Vidyasagar Kotha 1
1 Founder & CEO, Kotha Aerospace Private Limited, Devanahalli, Bangalore Rural, India.

Article Id - IJARET_14_06_003, Pages : 29-48, Date of Publication : 14, September 2023

8 Downloads   78 Views   0 Citation
Google Scholar Link
Academia Link


Universities across the world offering Aerospace Engineering and Aerospace Propulsion Programs to students and researchers at the Graduate levels do not have the required facilities and labs to impart the core knowledge practically pertaining to Aircraft Gas Turbine Engine Testing and Module Change Workshop (Build-up and stripping) during its Design & Maintenance phase that can prepare them for the Industry & Academia. This paper focuses on the benefits associated with the introduction and setup of Engine Test Beds and Module Change Workshops for university students and how they contribute to the development of curiosity, passion, and interest in how aero engines are built up, stripped, and tested. Also, this paper is aimed at the Aircraft Gas Turbine Engine Testing & Module Change Workshop and does not include Aircraft Piston Engine Testing. This study emphasizes the purpose of the Aircraft Engine Test Bed (AETB) and Aircraft Engine Module Change Workshop (AEMCW) and their location adjacent to each other. In addition to this, the paper illustrates the types of Aero Engine Test Bed, their evolvement, and the impetus for their establishment. However, this research paper primarily focuses on the functioning of the Uninstalled Indoor AETB of an engine in service to exhibit the activities performed in it and does not cover any other type of test bed due to research limitations although the outline and critical work of testing an engine in the design stage prior to entering into service & production has been covered wherever required. Furthermore, this paper underlies the functioning of AEMCW of a used or old engine and does not include the work carried out on a new engine in the design.  The major systems of AETB and their function have been presented to make students understand how the AETB systems contribute to the effective testing of Aircraft Engines in the uninstalled indoor AETB. The occasions Aircraft Engines are brought to AEMCW, the Ground Equipment, tools, testers, and precision tools used in the AEMCW, the importance of interface measurement of modules, and the merits of the modular concept of Aircraft Engines have been discussed exclusively. This paper explores and highlights the variation of thrust produced between an installed aircraft engine, an outdoor uninstalled aircraft engine in the outdoor test bed, and the indoor uninstalled aircraft engine in the indoor test bed and the factors leading to the variation.


Aircraft Engine Test Bed (AETB), Aircraft Engine Module Change Workshop (AEMCW), Installed Aircraft Engine, Outdoor Uninstalled Test Bed, Indoor Uninstalled Test Bed, Flying Test Bed

Share and Cite:

Vidyasagar Kotha, Aircraft Gas Turbine Engine Test Bed & Module Change Workshop: Review for Education & Research, International Journal of Advanced Research in Engineering and Technology (IJARET), 14(6), 2023, pp. 29-48


[1] Stanislav Fabry, Miroslav Spodniak, Peter Gasparovic, Peter Koscak, 2019, Aircraft Gas Turbine Engine Testing, Acta Avionica Journal 

[2] Razvan Marius Catana, Gabriel Dediu, Cornel Mihai Tarabic, Horatiu Mihai Serbescu, 2021, Performance Calculations of Gas Turbine Engine Components Based on Particular Instrumentation Methods, Applied Sciences Journal, MDPI

[3] Mustagime Tulin Yildirim, Bulent Kurt, 2018, Aircraft Gas Turbine Engine Health Monitoring System by Real Flight Data, 2018, International Journal of Aerospace Engineering, Hindawi 

[4] Shaalabh Gupta, Asok Ray, Soumik Sarkar, Murat Yasar, 2008, Fault Detection and Isolation in Aircraft Gas Turbine Engines – Part 1: Underlying Concept, JAER, Imech E

[5] Aerospace, Feb 2023, Academia Aloft, How Cranfield’s Flying Lab Teaches Hands-on Aeronautics, RAeS

[6] Linhart, Z. Konstrukce leteckých motorů IV (Aircraft Engine Design IV), Brno: Vojenská akademie Antonína Zápotockého. 1982. 74 p.

[7] Ballough, J. 2012, Correlation, operation, design, and modification of turbofan/jet engine test cells, USA: U.S. Department of Transportation FAA

[8] Federal Aviation Administration, 2016, Airplane turbofan engine operation and malfunctions basic familiarization for flight crews.

[9] Donner, R. 2018, Pratt & Whitney's Flying Test Bed, Institute of Electrical and Electronics Engineers 

[10] Andoga, R.., & et al. 2018, Intelligent Situational Control of Small Turbojet Engines. International Journal of Aerospace Engineering.

[11] PF Ashwood, “Operation and Performance measurement on engines in Sea-level testfacilities”, AGARD – LS –132, AGARD’ 86.

[12] J Freuler and RA Dickman, 1986, Current techniques for jet engine test cell modeling, AIAA/ASME /SAE, 18th Joint Propulsion Conference, Cleveland, Ohio.

[13] A.I.Karamanlis, J.S.Sokhey, T.C.Dunn, D.C.Bellomy, 1986, Theoretical and experimental investigation of test cell aerodynamics for turbofan applications, AIAA /ASME /SAE/ASEE, 22 nd Joint Propulsion Conference, AIAA.

[14] STAR CD – Manual

[15] Jake Hardiman, 2021, Flying Engine Test Beds: Everything You Need To Know, Aviation News, Sumple Flying

[16] Rolls Royce, 2023, How to Test a Jet Engine, News & Insights

[17] Rolls Royce, 1986, The Jet Engine, Rolls Royce Plc

[18] AJB Jackson, P Laskaridis, P Pilidis, 2008, A Test Bed for Small Aero Gas Turbines for Education and for University: Industry Collaboration, Turbo Expo: Power for Land, Sea, and Air, ASME

[19] EASA, 2020, Type-Certificate Data Sheet, No. E. 009, Engine RTM 322, Safran Helicopter Engines, France 

[20] H Cohen, GFC Rogers, HIH Saravanamuttoo, 1996, Gas Turbine Theory, Longman Group Limited, England

[21] Charles E Otis, Peter A Vosbury, 2002, Aircraft Gas Turbine Power Plants, Jeppesen, 

[22] SAE AIR 1873, 1998, Guide to Limited Engine Monitoring Systems for Aircraft Gas Turbine Engines; Aerospace Information Report; SAE International: Warrendale, PA, USA.

[23] SAE ARP 1587, 1981, Aircraft Gas Turbine Engine Monitoring System Guide; Aerospace Recommended Practice; SAE International: Warrendale, PA, USA.

[24] A. J. Volponi, 2014, Gas turbine engine health management: past, present, and future trends,” Journal of Engineering for Gas Turbines and Power.

[25] Lu, J. Huang, and Y. Lv, 2013, Gas path health monitoring for a turbofan engine based on a nonlinear filtering approach, Energies.

[26] Philip P Walsh, Paul Fletcher, 2004, Gas Turbine Performance, Bristol: Blackwell Publishing.




Please click the following link to see thescreenshot

Web of Science (Clarivate Analytics)

Total citation 80 from IJARET indexed documents from 2010 to 2021

Please click the following link to see thescreenshot


Total citation 132 from 393 indexed documents from 2010 to 2021

Please click the following link to see thescreenshot

Google Scholar

Total citation 2756 from 2010 to 2021, H-index - 17, i10-index - 54

Please click the following link to see thescreenshot

Scope Database Source Link:

Our IAEME Publication journals are indexed in various indexing search engines given below

Aim and Scope

  • International Journal of Advanced Research in Engineering and Technology (IJARET) is a peer-reviewed, open access, interdisciplinary and fully refereed journal that publishes original research articles and review articles in all areas of Engineering and Technology. Papers should focus on technical applications and developing research at the cutting edge of the all Engineering and Technology related discipline.

  • The aim of the journal is to provide academicians, researchers and professionals a platform to share cutting-edge development in the field of Engineering and Technology.

  • International Journal of Advanced Research in Engineering and Technology (IJARET) is a journal promoting the discovery, innovation, advancement and dissemination of basic and transitional knowledge in engineering, technology and related disciplines.

Chief Editor

Dr. S.Balasubramanian - IAEME Publication, Chennai, India

Managing Editor

Dr. G. Arthanareeswaran - Department of Chemical Engineering, National Institute of Technology, Trichy, India

Associate Editor

Dr. N. Kannan - St.Mary's School of Management Studies, India

Dr. V. Antony Joe Raja - Sri Muthukumaran Institute of Technology, India

Prof. B. Arthi Gandhimathi - IAEME Publication, India

Dr. N. Tamil Selvan - RVS College of Engineering & Technology, Coimbatore, India

Copy Editor

Mr. R. P. Gopinath - IAEME Publication, India

Editorial Board

Dr. Kadhim Naief Kadhim - Professor, Department of Civil Engineering, College of Engineering, University of Babylon, IRAQ

Dr. Sridhar Iyer - Professor, Department of Computer Science and Engineering Indian Institute of Technology Bombay, Mumbai, India

Dr. Ajeet kumar rai - SSET, SHIATS-DU, Allahabad, India

Dr. Mohamed Kchaou - University Of Sousse, Tunisia

Dr. Chao Wang - Nanyang Technological University, Singapore.

Dr. Mohd Azman Bin Abdullah - University Teknikal Malaysia Melaka, Malaysia.

Dr. Fateh Mebarek-Oudina - Skikda University, Algeria.

Dr. Mohamed saber mohamed gad nemat alla - National research centre (nrc) el dokki, Giza, Egypt

Dr. Barish dantal - Application Development Engineer, Momentive Performance Materials, US

Dr. Moises diaz-cabrera - University of Las Palmas de Gran Canaria, Spain

Dr. Irvan dahlan - University sains Malaysia.

Dr. Najm alghazali - Babylon university, Iraq.

Dr. Mansour Jadid - University of Dammam, Dammam, Saudi Arabia

Dr. Mohammed Al Mohsin - University of Buraimi, Oman

Dr. Pei tang - JCMS, Inc- Mercerville, USA

Dr. Manish kewalramani - College of Engineering, Abu Dhabi University, Abu Dhabi, UAE.

Dr. Nazimabdulnariman - Bauhaus University Weimar,Germany.

Dr. Yongwei shan - Oklahoma state university, USA.

Dr. Saleh abd el-aleem mohammed - Faculty of Science, Fayoum University, Fayoum, Egypt.

Dr. S. Kishore reddy - Adama Science & Technology University, Ethiopia.

Dr. Aldona kuśmińska-fijałkowska - Colorado Technical University, USA

Dr. Bensafi abd-el-hamid - Abou Bekr Belkaid University of Tlemcen, Algeria.

Dr. K.V.I.N.Acharyulu - Bapatla Engineering College,Bapatla, India

Dr. Vishnu narayan mishra - Sardar Vallabhbhai National Institute of Technology, India

Dr. A.Elaya perumal - Anna University, India

Dr. Madhu - Government Engg. College, KRPET, India

Dr. G. Arthanareeswaran - NIT Trichy, India

Dr. T. R. Vijayaram - VIT University, Chennai, India

Dr. Sunil kumar - National Institute of Technology, India

Dr. Ratri parida - IIT Kharagpur, India

Dr. Waldemar Nowakowski - Kazimierz Pulaski University of Technology and Humanities, Poland

Dr. Parin Shah - Institute of Technology, Nirma University, India

Dr. Ashok Tripathi - SHIATS, Allahabad, India

Dr. H.T.Basavarajappa - University of Mysore, India

Dr. R. Dilli Babu - Department of Industrial Engineering, Anna University, Chennai-India

Dr. Nilaj N. Deshmukh - Fr.C.Rodrigues Institute of Technology, India

Dr. Wilson Udo Udofia - University of Uyo, Nigeria

Dr. Satish kumar Moparthi - Kallam Haranadha Reddy Institute of Technology, Andhra Pradesh, India

Dr. H. Erdem Çamurlu - Akdeniz University, TÜRKİYE

Dr. GIRISHA L - PES Institute of Technology and Management, Karnataka, India

Dr. M. Mubarak - Karpagam College of Engineering, Tamilnadu, India

Dr. Ahmed Daabo - University of Mosul, Mosul, Iraq

Dr. R. Sharmila - Er.Perumal Manimekalai College of Engineering, Tamilnadu, India

Dr. Mourad HEBALI - University Mustafa Stmboli, Algeria

Dr. Hao Yi - Chongqing University, China

Dr. Ahmed Kawther Hussein - Mustansiriyah University, Baghdad, Iraq

Dr. Bambang Leo Handoko - Bina Nusantara University of Indonesia

Dr. T.Phani Madhavi - Professor, Department of Civil Engineering, Bapatla Engineering College, Andhra Pradesh, India

Dr. Prateek Nigam - Bansal College of Engineering, Madhya Pradesh, India

Dr. D. Narasimhan - SASTRA Deemed University, Tamilnadu, India

Prof. Taher Anwar Tawfik - Higher Institute for Engineering, 6 October City, Egypt

Dr. Mohamed KCHAOU - College of Engineering, University of Bisha, Saudi Arabia; National Engineering School of Sfax, University of Sfax, Tunisia

Dr. A R Pradeep Kumar - Dhanalakshmi College of Engineering, Tamilnadu, India

Dr. C. Kamalanathan - GITAM Deemed to be University, Andhra Pradesh, India

Dr. Olha V. Prokopenko - International Humanitarian University, Ukraine

Dr. Iryna Bashynska - Odessa National Polytechnic University

Dr. Shahzad Ashraf - Hohai University, Changzhou Campus, China

Dr. Francesco Abbondati - Parthenope University of Napoli, Italy

Dr. Dhanasekaran S - Annamalai University, Tamil Nadu, India

Dr. Naga Swetha Pasupuleti - Associate Professor, Head – International Research & Collaborations Cell, Galgotias University, Greater Noida, India.

Prof. Ruqayah K Mohammed - Faculty Member in Civil Engineering Department, Babylon University, Iraq.

Dr. Mohamed Guendouz - Lecturer, University of Medea, Algeria

Dr. Mahdi Hosseini - Research Scientist, Department of Civil Engineering, Jawaharlal Nehru Technological University Hyderabad, India.

Dr. Hesham A. Numan - Mustansiriyah University, Faculty of Engineering, Civil Engineering Department, Baghdad, Iraq.

Dr. N. Pannirselvam - Associate Professor, Department of Civil Engineering, SRM Institute of Science and Technology, Chennai, India.

Dr. T. Kamatchi - Associate Professor, Mechanical Department, Velammal College of Engineering and Technology, Tamilnadu, India.

Dr. A.N. Jha - Department of Electrical Engineering, Indian Institute of Technology, New Delhi, India.

Prof. Isma-ae Chelong - Assistant Professor, Faculty of Science Technology and Agriculture, Yala Rajabhat University, Thailand

Prof. Ing. Giorgio Frunzio - Department of Architecture and Disease Industrial, University of Campania Luigi Vanvitelli, Italy

Dr. A. Mallikarjuna Reddy - Assoc. Professor, CSE Department, Anurag Group of Institutions(Autonomous), Hyderabad, India

Dr. Aaisha Makkar - Research Associate, International Project on Cyber Security, Punjab, India

Dr. Ravindran Mariappan - Associate Professor, (SG), Electrical and Electronics Engineering Department, National Engineering College, Kovilpatti, Tamilnadu, India

Prof. Uma Govindarajan - Professor & Head of Electrical and Electronic Engineering Department, College of Engineering Guindy, Anna University, Tamil Nadu, India

Dr. S.M.Chaware - Professor, Computer Engineering, ISO, IQAC and NBA Coordinator, Marathwada Mitramandal’s College of Engineering, Pune-India

Ms. Niharikareddy Meenigea - Data Analyst, Department of Business Administration, Virginia International University, Fairfax, VA, United States

Dr. R.Neela - Professor of Electrical Engineering, Annamalai University, Tamilnadu, India

Dr. Manikandan Parasuraman - Professor, Computer Science and Engineering Department, Malla Reddy Engineering College for Women, Maisammaguda, Secunderabad, Telangana, India.

Prof. Ravi Kumar Yeda - Scientist-G, SINT (E) Division, Defence Electronics Research Laboratory (DLRL), Naseeb Nagar, Chandrayangutta, Hyderabad, Telangana, India

Prof. L. Premalatha - Department of Electrical Engineering, VIT University, Chennai, India

Dr. Tanuja K Sarode - Professor and Head, Department of Computer Engineering, Thadomal Shahani Engineering College, Mumbai, India

Dr. MaruthuPandi Perumal - Assistant Professor, Department of Electrical and Electronics Engineering, Govt. College of Technology, Coimbatore, Tamilnadu, India

Prof. Balakrishnan Pappan - Associate Professor, Department of Electrical Engineering, Malla Reddy Engineering College for Women, Maisammaguda, Telangana, India

Dr. Sivarani Thankamony Saradadevi - Professor, Department of Electrical and Electronics Engineering, Arunachala College of Engineering for women, Anna University, Chennai, Tamilnadu, India

Dr. Moturi Satyanarayana - Professor, Department of ECE, MVGR College of Engineering (A), Vijayanagaram, Andra Pradesh, India

Dr. Gowri Manohar T - Department of Electrical & Electronics Engineering, Sri Venkateswara University College of Engineering, Tirupati, Andhra Pradesh

Dr. S. Sophia - Professor and Head, Department of Electronics and Communication Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, Tamilnadu, India

Dr. Raad N.Butris - Department of Mathematics, College of Basic Education, University of Duhok, Iraq

Dr. AshokKumar Ramaswamy - Professor, Department of Electrical Engineering, Annamalai University, Tamil Nadu, India

Prof. Adireddy Rajasekhar Reddy - Professor, Department of Computer Science and Engineering, NBKR Institute of Science and Technology, Nellore, Andhra Pradesh, India

Dr. Appini Narayana Rao - Associate Professor, Department of Computer Science and Engineering, NBKR Institute of Science and Technology, Andhra Pradesh, India

Dr. Annapurani Panaiyappan K - Associate Professor, Department of Computer Science and Engineering, SRM Institute of Science and Technology, Kattankulathur, India

Mr. Venkata Naga Satya Surendra Chimakurthi - Solutions Architect, Cognizant Technology Solutions, USA

Prof. Sandeep Chaware - Professor, IT Department Rajarshi Shahu College of Engineering, Pune, India

Dr. Vikram Mohanlal Agrawal - Assistant Professor, Computer Engineering Department, B & B Institute of Technology (SFI), Gujarat, India

Mr. Samrajyam Singu - Software Developer, Vanguard, USA

Mr. Ashok Kumar Reddy Nadikattu - Researcher/Sr. Software Engineer, Arissoft Solutions, USA

Dr. Belwin Edward Jeyaraj - Associate Professor, School of Electrical Engineering, Vellore Institute of Technology (VIT), Vellore, Tamilnadu, India

Dr. Inderjeet Kaur - Ajay Kumar Garg Engineering College, Ghiaziabad, India

Mr. Anil G. Naik - Lead Product Manager, Meta, Menlo Park, CA, USA

Mr. Venkata Ravi Kiran Kolla - Sr. Researcher and Sr. Software Engineer, Department of Information Technology, USA

Ms. Lakshmi Namratha Vempaty - Lead Data Scientist, Avis Budget Group, New Jersey, USA

Reviewer Board

Dr. Irvan Dahlan - Universiti Sains Malaysia,Malaysia

Dr. Mansour Jadid - University of Dammam, Dammam, Saudi Arabia

Dr. Nazimabdulnariman - Bauhaus Universitat Weimar,Germany

Dr. Saleh Abd El-Aleem Mohammed - Faculty of Science, Fayoum University, Fayoum, Egypt

Dr. Venkata Ragahavendra Miriampally - Adama Science & Technology University, Ethiopia

Dr. Sukumar Senthilkumar - Chon Buk National University, South Korea

Dr. Sattar J Aboud - Anglia Ruskin University, UK

Dr. M. H. Raza - Dalhousie University,Canada

Dr. Mohammed.Faisal - Nizwa College of Technology,OMAN

Dr. Dheyaa J. Kadhim - College of Engineering, University of Baghdad, Iraq

Dr. Mohammed Ali Hussain - Sri Sai Madhavi Institute of Science & Technology, India

Dr. A.K.Sen - Principal, St. Francis Institute of Technology, Mumbai University, India

Dr. Suryakant B Patil - JSPM's ICOER, Wagholi, Pune, India

Dr. A.Udayakumar - Hindustan University, India

Dr. V.Baskaran - Bannari Amman Institute of Technology, India

Dr. Uday Kumar - Mahatma Gandhi Institute of Technology, India

Dr. A. G. Matani - Govt. College of Engg, Amravati ,India

Dr. P.Muthupriya - Sri Krishna College of Technology ,Coimbatore, India

Dr. Nkolika Joy Peter - Covenant University, Nigeria

Dr. J.B. Seventiline - Professor and Assistant Principal of GITAM Institute of Technology under GITAM, Gandhi Nagar, Rushikonda, Visakhapatnam, Andhra Pradesh 530045.

Mr. Shiwen Zhao - Electrical Engineering, Nari Group Corporation Information & Communication Technology Co. Ltd, Pukou Qu, Nanjing, China

Dr. Umapathi Reddy P - Professor, Department of Electrical Engineering, Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India

Dr. Kiranmayi R - Professor & Head of Department, Department of Electrical Engineering, JNTUA, Anantapur, Andhra Pradesh, India

Dr. Bikshalu Kalagadda - Assistant Professor, Department of ECE, Kakatiya University College of Engineering and Technology (KUCET), Kakatiya University, Warangal, Telangana, India

For Authors

Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system. Submissions by anyone other than one of the authors will not be accepted.
Regardless of the source of the word-processing tool, only electronic PDF or MS-Word files can be submitted through the online submission system. If for some technical reason online submission is not successful, the author can submit the manuscript to

Paper title (14 Bold)- Capital Letter

First Author1, Second Author2 (13 Bold- Times New Roman)

1(Department, College/ University Name, Address, Country Name, Email) (12)

2(Department, College/ University Name, Address, Country Name, Email) (12)

ABSTRACT (12 Bold)

The abstract should summarize the content of the paper. Try to keep the abstract below 350 words. Do not make references nor display equations in the abstract. The journal will be printed from the same-sized copy prepared by you. Your manuscript should be printed on A4 paper (21.0 cm x 29.7 cm). It is imperative that the margins and style described below be adhered to carefully. This will enable us to keep uniformity in the final printed copies of the Journal. Please keep in mind that the manuscript you prepare will be photographed and printed as it is received. Readability of copy is of paramount importance.(12)

Keywords (12 Bold) : About five key words in alphabetical order, separated by comma (12)


The introduction of the paper should explain the nature of the problem, previous work, purpose, and the contribution of the paper. The contents of each section may be provided to understand easily about the paper. (12)


The headings and subheadings, starting with "1. Introduction", appear in upper and lower case letters and should be set in bold and aligned flush left. All headings from the Introduction to Acknowledgements are numbered sequentially using 1, 2, 3, etc. Subheadings are numbered 1.1, 1.2, etc. If a subsection must be further divided, the numbers 1.1.1, 1.1.2, etc.

The font size for heading is 12 points bold face and subsections with 12 points and not bold. Do not underline any of the headings, or add dashes, colons, etc. (12)


The first paragraph under each heading or subheading should be flush left, and subsequent paragraphs should have a five-space indentation. A colon is inserted before an equation is presented, but there is no punctuation following the equation. All equations are numbered and referred to in the text solely by a number enclosed in a round bracket (i.e., (3) reads as "equation 3"). Ensure that any miscellaneous numbering system you use in your paper cannot be confused with a reference [4] or an equation (3) designation. (12)


To ensure a high-quality product, diagrams and lettering MUST be either computerdrafted or drawn using India ink.

Figure captions appear below the figure, are flush left, and are in lower case letters.When referring to a figure in the body of the text, the abbreviation "Fig." is used. Figures should be numbered in the order they appear in the text.

Table captions appear centered above the table in upper and lower case letters. When referring to a table in the text, no abbreviation is used and "Table" is capitalized. (12). Figures and tables should be included in the running text itself


A conclusion section must be included and should indicate clearly the advantages, limitations, and possible applications of the paper. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extentions. (12)


An acknowledgement section may be presented after the conclusion, if desired.( 12)


This heading is not assigned a number.

A reference list MUST be included using the following information as a guide. Only cited text references are included. Each reference is referred to in the text by a number enclosed in a square bracket (i.e., [3]). References must be numbered and ordered according to where they are first mentioned in the paper, NOT alphabetically.

Examples follow:

ournal Papers:

[1] M Ozaki, Y. Adachi, Y. Iwahori, and N. Ishii, Application of fuzzy theory to writer recognition of Chinese characters, International Journal of Modelling and Simulation, 18(2), 1998, 112-116. (12)


[2] R.E. Moore, Interval analysis (Englewood Cliffs, NJ: Prentice-Hall, 1966). (12) Note that the title of the book is in lower case letters and italicized. There is no comma following the title. Place of publication and publisher are given.

Chapters in Books:

[3] P.O. Bishop, Neurophysiology of binocular vision, in J.Houseman (Ed.), Handbook of physiology, 4 (New York: Springer-Verlag, 1970) 342-366. (12) Note that the place of publication, publisher, and year of publication are enclosed in brackets. Editor of book is listed before book title.


[4] D.S. Chan, Theory and implementation of multidimensional discrete systems for signal processing, doctoral diss., Massachusetts Institute of Technology, Cambridge, MA, 1978. (12)

Proceedings Papers:

[5] W.J. Book, Modelling design and control of flexible manipulator arms: A tutorial review, Proc. 29th IEEE Conf. on Decision and Control, San Francisco, CA, 1990, 500-506 (12)

Manuscripts not adhering to journal guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. The review process is double blind. The Editor prepares a decision letter according to the comments of the reviewers, which is sent to the corresponding author. All non-reviewed manuscripts are sent back within 10 days and the decision letters of manuscripts are sent within 4 weeks.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, CC BY (or the Creative Commons Attribution-NonCommercial License CC BY-NC), which allows users to (noncommercially) copy, use, distribute, transmit and display the work publicly and to make and distribute derivative works, in any digital medium for any responsible purpose, subject to proper attribution of authorship.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
IAEME Publication is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance..
IAEME Publication follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct.
Please find more general information for authors on the page: Information for Authors.

IAEME Publication Fees

IAEME Publication charges an Article Processing Charge (APC) once an article is accepted for publication. These charges cover the costs of turning a manuscript into a finished article, as well as the costs of hosting, distributing and promoting an article.

Article Processing Charges explained

We are committed to making the costs of publishing as clear as possible and so the charges for each journal are clearly displayed on each journal`s homepage.

When a manuscript is submitted, it passes through the many different departments at Hindawi to ensure the quality checks, peer review, production and promotion of articles is carried out in a timely manner and to a high standard:

✔ The Editorial Screening team, who perform initial technical and ethical checks

✔ The Editorial team, who help the journal`s Academic Editors manage the review process

✔ The Production team, who convert the manuscript to a professionally typeset article and well-structured file format

✔ The Proofing team, who coordinate the proofing process through Hindawi`s Online Proofing System (OPS)

✔ The Editorial Quality Assurance team, who perform a final check to ensure that the manuscript and its review process adhere to the journal`s guidelines and policies

✔ Our Marketing and Communication teams, who ensure your article receives the attention it deserves.

✔ The Technology team, who build and maintain our systems, and develop new systems

The work these teams do contribute to the requirement of an APC and is why the actual amount payable varies depending on the journal in which you wish to publish your article.

IAEME Publication does not request Article Submission Charges, also called Submission Fees. These are due at the time of submission of the manuscript. Nor does IAEME charge per page or for color figures or for any other items for which other publishers are known to charge.

Sources for Article Processing Charges (APC)

Authors of an article are responsible for arranging the payment of APC. Still, that typically does not mean that authors end up paying for the publication of the article. The cost of APC is very often assumed either by the organization funding the research published in the article, or by an Open Access Publishing Fund, or by the institution at which the author is employed.

Fair Dealing - Authors and Publisher

When an author submits a manuscript for review at one of IAEME`s journals, the submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. The manuscript should also not be submitted to any other journal during the review process at IAEME Publication. In case the review process at IAEME takes much longer than stated and the author wishes to end the review process at IAEME, he/she should get in contact with the Editorial Assistant of the journal at IAEME and come to an agreement suitable for both sides after looking at the stage of the manuscript in the review process.

With the APC specified above, the author is given an indication what the APC will be. IAEME is charging Publication Fees (APC) but not Submission Fees. This is to the benefit to authors because payments are only due once the author knows the manuscript is accepted. IAEME with editors and reviewers puts much effort in dealing with the manuscript and expects the authors to stick to the common plan of publishing the paper which is linked to payments of APC as given above at the end of the review process. The author is not legally bound at this time, but it would be seen as a strong breach of academic conduct to back off from the publication process. Once the manuscript is accepted for publication, IAEME will issue an invoice in the Paper Submission and Manuscript Tracking System. This is IAEME `s legal offer and will state the regular APC of the journal. The Corresponding Author is expected to arrange payments of the amount stated at this time. In severe cases IAEME `s Complaints Procedure can be followed and the result of this should be binding to the author.

Refund Policy

Once an article has been accepted for publication, any Article Processing Charges on the article become due. The submitting author accepts responsibility for the Article Processing Charges, and will not issue refunds of any kind except those payments made by mistake or in excess of the amount required.

Subject Area
The topics to be covered by this journal include but are not limited to the following fields:
• General Engineering
• Decision Sciences
• Earth and Planetary Sciences
• Business
• Management and Accounting
• Biochemistry
• Genetics and Molecular Biology
• Environmental Science
• Chemical Engineering
• Electrical
• Electronics and Computer Engineering
• Information Engineering and Technology
• Mechanical
• Industrial and Manufacturing Engineering
• Automation and Mechatronics Engineering
• Material and Chemical Engineering
• Civil and Architecture Engineering
• Biotechnology and Bio Engineering
• Environmental Engineering
• Petroleum and Mining Engineering
• Marine and Agriculture engineering
• Aerospace Engineering

Create Account

Log In Your Account