Call For Paper November - 2023
Submit Online
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) > Volume 13, Issue 8, August 2022 View PDF HTML
A STUDY ON INDIA’S FIGHT AGAINST NOVEL CORONAVIRUS (COVID-19) OUTBREAK: THE PANDEMIC WITH GEOGRAPHIC DIFFERENCES DEATHS CASES AND INCIDENCE
Dr. Mukta Jagdish 1Article Id - IJARET_13_08_004, Pages : 27-42, Date of Publication : 17, August 2022
Google Scholar Link
Academia Link
Scopedatabase Link : https://sdbindex.com/Document/document_search?title=A STUDY ON INDIA’S FIGHT AGAINST NOVEL CORONAVIRUS (COVID-19) OUTBREAK: THE PANDEMIC WITH GEOGRAPHIC DIFFERENCES DEATHS CASES AND INCIDENCE&type=1
Abstract
This research defines the newly discovered coronavirus called Novel Coronavirus which has been announced pandemic of severe acute respiratory syndrome COVID-19 a large global outbreak and is a major public health issue as a biological disaster. Coronaviruses are a large family of viruses that may cause illness in humans and animals. In humans, several coronaviruses are known to cause respiratory infections ranging from the common cold to more severe diseases such as Middle East Respiratory Syndrome (MERS) and Severe Acute Respiratory Syndrome (SARS). This new virus and disease were unknown before the outbreak began in Wuhan, China, in December 2019. Coronavirus has “high infectivity but low mortality”. The mortality rate ranges between 2-3%. It is significantly less severe than 2003 SARS (MR: 10%) or 2012 MERS (MR: 35%) outbreaks. The risk of death is only higher in older people (above the age of ~60 years) and people with pre-existing health conditions. As per the research time between catching the virus and beginning to show symptoms of coronavirus is 2-14 days with symptom onset is gradual and the symptoms long last in the mild cases-2 weeks, severe or critical disease- 3-6 weeks. Results as spread by people-to-people transmission via droplets or direct contact and infection estimated as the incubation period of 4 to 6 days. A pandemic is spreading in countries, the whole picture of the world is changing, it is considered as global changes in the year 2020. Every country is facing difficulties in this pandemic. In this research study, it defines about some of the major prevention and precaution followed by India to fights against COVID-19 and a total number of COVID-19 ve+ people cases (Confirmed case, cured case, and death cases in India till 30 April 2020. In India, 32 states and UT got affected with COVID-19, till dated 30 April 2020). The Indian government was continuously monitoring and tracking the spread of COVID-19 and finding the preliminary steps to fight with coronavirus. This study also describes the static view of a confirmed case, cured, and status of the sample tested to fight against COVID-19 for the UT Andaman and Nicobar Islands, India.
Keywords
COVID-19, Measures, Prevention, Pandemic, Coronavirus, Biological Disaster
Share and Cite:
References
[1] C. Huang, Y. Wang, X. Li, L. Ren, J. Zhao, Y. Hu, L. Zhang, G. Fan, J. Xu, X. Gu, Z. Cheng, T. Yu, J. Xia, Y. Wei, W. Wu, X. Xie, W. Yin, H. Li, M. Liu, Y. Xiao, H. Gao, L. Guo, J. Xie, G. Wang, R. Jiang, Z. Gao, Q. Jin, J. Wang, B. Cao, Clinical features of patients infected with 2019 novel coronavirus in Wuhan, China, Lancet Lond Engl 395 (2020) 497–506 [PMID: 31986264 DOI: 10.1016/S0140-6736(20)30183-5].
[2] Novel Coronavirus Disease (COVID-19) Situation Update Report-5, World Health Organization, India, February 28, 2020, https://www.who.int/docs/default-source/wrindia/situation-report/india-situation-report-5.pdf
[3] Novel Coronavirus Disease (COVID-19) Situation Update Report-5, World Health Organization, India, March 14, 2020 [1], https://www.who.int/docs/default-source/wrindia/situation-report/india-situation-report-7.pdf
[4] N. Zhu, D. Zhang, W. Wang, X. Li, B. Yang, J. Song, X. Zhao, B. Huang, W. Shi, R. Lu, P. Niu, F. Zhan, X. Ma, D. Wang, W. Xu, G. Wu, G.F. Gao, W. Tan, China Novel Coronavirus Investigating and Research Team. A Novel Coronavirus from Patients with Pneumonia in China, 2019, N Engl J Med 382 (2020) 727–733 [PMID: 31978945 DOI: 10.1056/NEJMoa2001017].
[5] R.Prasad, Bindu Shajan Perappadan, Jyoti Shelar, Jacob Koshy, The Pandemic Notebook, a handy guide from the Hindu on understanding the coronavirus pandemic and staying protected against COVID-19, edited by P.J. George, The Hindu, India, https://epaper.thehindu.com
[6] Number of Active COVID-19 Information, 30 April 2020, Ministry of Health and Family Welfare, Government of India, https://www.mohfw.gov.in/
[7] Coronavirus disease 2019 (COVID-19) Situation Report – 69 [Accessed: Mar 29, 2020]. Available from: https://www.who.int/docs/default-source/coronaviruse/ situation-reports/20200329-sitrep-69-COVID-19.pdf. [4] W.-J. Guan, Z.-Y. Ni, Y. Hu, W.-H. Liang, C.-Q. Ou, J.-X. He, L. Liu, H. Shan, C.- L. Lei, D.S.C. Hui, B. Du, L.-J. Li, G. Zeng, K.-Y. Yuen, R.-C. Chen, C.-L. Tang, T. Wang, P.-Y. Chen, J. Xiang, S.-Y. Li, J.-L. Wang, Z.-J. Liang, Y.-X. Peng, L. Wei, Y. Liu, Y.-H. Hu, P. Peng, J.-M. Wang, J.-Y. Liu, Z. Chen, G. Li, Z.-J. Zheng, S.-Q. Qiu, J. Luo, C.-J. Ye, S.-Y. Zhu, N.-S. Zhong, China Medical Treatment Expert Group for Covid-19. Clinical Characteristics of Coronavirus Disease 2019 in China, N Engl J Med (2020) [PMID: 32109013 DOI: 10.1056/NEJMoa2002032] [Epub ahead of print].
[8] Novel Coronavirus Disease (COVID-19) Situation Update Report-5, World Health Organization, India, February 28, 2020, https://www.who.int/docs/default-source/wrindia/situation-report/india-situation-report-19.pdf
[9] CDC, Coronavirus Disease 2019 (COVID-19) Situation Summary. Centers for Disease Control and Prevention, [Accessed: Mar 28, 2020]. Available from: (2020) https://www.cdc.gov/coronavirus/2019-ncov/cases-updates/summary.html.
[10] Symptoms Information, Ministry of Health and Family Welfare, Government of India, https://www.mohfw.gov.in/
[11] Symptoms Information, The Daily Telegram, Port Blair, Andaman and Nicobar Islands, Ministry of Health and Family Welfare, Government of India, https://dt.andaman.gov.in
[12] H. Han, L. Yang, R. Liu, F. Liu, K.-L. Wu, J. Li, X.-H. Liu, C.-L. Zhu, Prominent changes in blood coagulation of patients with SARS-CoV-2 infection, Clin Chem Lab Med (2020) [PMID: 32172226 DOI: 10.1515/cclm-2020-0188].
[13] R.Prasad, The Pandemic Notebook, a handy guide from the Hindu on understanding the coronavirus pandemic and staying protected against COVID-19, edited by P.J. George, The Hindu, India, https://epaper.thehindu.com
[14] Prevention Information, Ministry of Health and Family Welfare, Government of India, https://www.mohfw.gov.in/
[15] Decoding India’s Covid-19 testing, State to State, The Daily Telegram, Port Blair, Andaman and Nicobar Islands, Ministry of Health and Family Welfare, Government of India, News dated 17 April 2020. https://dt.andaman.gov.in
[16] Information, Ministry of Health and Family Welfare, Government of India, dated 30 April 2020, https://www.mohfw.gov.in/
[17] Health Bulletin for Containment of Novel Coronavirus Disease, The Daily Telegram, Port Blair, Andaman and Nicobar Islands, Ministry of Health and Family Welfare, Government of India, News dated 1st May 2020. https://dt.andaman.gov.in
Indexing
SCOPE DATABASE
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) is indexed in Scope Database from 2010 to 2021
Please click the following link to see thescreenshot
Web of Science (Clarivate Analytics)
Total citation 80 from IJARET indexed documents from 2010 to 2021
Please click the following link to see thescreenshot
SCOPUS
Total citation 132 from 393 indexed documents from 2010 to 2021
Please click the following link to see thescreenshot
Google Scholar
Total citation 2756 from 2010 to 2021, H-index - 17, i10-index - 54
Please click the following link to see thescreenshot
Scope Database Source Link: https://sdbindex.com/Sourceid/00000006
Our IAEME Publication journals are indexed in various indexing search engines given below
- Scope Database (www.sdbindex.com)
- Scopus (www.scopus.com)
- Google Scholar (https://scholar.google.com)
- ResearchGate (https://www.researchgate.net/)
- Academia (https://www.academia.edu/)
- SSRN (https://www.ssrn.com/)
- Indian Citation Index (ICI) (http://www.indiancitationindex.com/)
- Advanced Science Index (https://journal-index.org/)
- ResearchBib (https://www.researchbib.com/)
- Semantic Scholar
- ERIC (Education Resources Information Center)
- ProQuest
- EconLit
- ASEAN Citation Index (ACI)
- BASE
- ebsco
- PubMed
- I2OR
- International Scientific Indexing(ISI)
- Cosmos Impact Factor
- Open Academic Journals Index
- Mendeley
- Crossref
- Science Gate
Aim and Scope
-
International Journal of Advanced Research in Engineering and Technology (IJARET) is a peer-reviewed, open access, interdisciplinary and fully refereed journal that publishes original research articles and review articles in all areas of Engineering and Technology. Papers should focus on technical applications and developing research at the cutting edge of the all Engineering and Technology related discipline.
-
The aim of the journal is to provide academicians, researchers and professionals a platform to share cutting-edge development in the field of Engineering and Technology.
-
International Journal of Advanced Research in Engineering and Technology (IJARET) is a journal promoting the discovery, innovation, advancement and dissemination of basic and transitional knowledge in engineering, technology and related disciplines.
Chief Editor
Dr. S.Balasubramanian - IAEME Publication, Chennai, India
Managing Editor
Dr. G. Arthanareeswaran - Department of Chemical Engineering, National Institute of Technology, Trichy, India
Associate Editor
Dr. N. Kannan - St.Mary's School of Management Studies, India
Dr. V. Antony Joe Raja - Sri Muthukumaran Institute of Technology, India
Prof. B. Arthi Gandhimathi - IAEME Publication, India
Dr. N. Tamil Selvan - RVS College of Engineering & Technology, Coimbatore, India
Copy Editor
Mr. R. P. Gopinath - IAEME Publication, India
Editorial Board
Dr. Kadhim Naief Kadhim - Professor, Department of Civil Engineering, College of Engineering, University of Babylon, IRAQ
Dr. Sridhar Iyer - Professor, Department of Computer Science and Engineering Indian Institute of Technology Bombay, Mumbai, India
Dr. Ajeet kumar rai - SSET, SHIATS-DU, Allahabad, India
Dr. Mohamed Kchaou - University Of Sousse, Tunisia
Dr. Chao Wang - Nanyang Technological University, Singapore.
Dr. Mohd Azman Bin Abdullah - University Teknikal Malaysia Melaka, Malaysia.
Dr. Fateh Mebarek-Oudina - Skikda University, Algeria.
Dr. Mohamed saber mohamed gad nemat alla - National research centre (nrc) el dokki, Giza, Egypt
Dr. Barish dantal - Application Development Engineer, Momentive Performance Materials, US
Dr. Moises diaz-cabrera - University of Las Palmas de Gran Canaria, Spain
Dr. Irvan dahlan - University sains Malaysia.
Dr. Najm alghazali - Babylon university, Iraq.
Dr. Mansour Jadid - University of Dammam, Dammam, Saudi Arabia
Dr. Mohammed Al Mohsin - University of Buraimi, Oman
Dr. Pei tang - JCMS, Inc- Mercerville, USA
Dr. Manish kewalramani - College of Engineering, Abu Dhabi University, Abu Dhabi, UAE.
Dr. Nazimabdulnariman - Bauhaus University Weimar,Germany.
Dr. Yongwei shan - Oklahoma state university, USA.
Dr. Saleh abd el-aleem mohammed - Faculty of Science, Fayoum University, Fayoum, Egypt.
Dr. S. Kishore reddy - Adama Science & Technology University, Ethiopia.
Dr. Aldona kuśmińska-fijałkowska - Colorado Technical University, USA
Dr. Bensafi abd-el-hamid - Abou Bekr Belkaid University of Tlemcen, Algeria.
Dr. K.V.I.N.Acharyulu - Bapatla Engineering College,Bapatla, India
Dr. Vishnu narayan mishra - Sardar Vallabhbhai National Institute of Technology, India
Dr. A.Elaya perumal - Anna University, India
Dr. Madhu - Government Engg. College, KRPET, India
Dr. G. Arthanareeswaran - NIT Trichy, India
Dr. T. R. Vijayaram - VIT University, Chennai, India
Dr. Sunil kumar - National Institute of Technology, India
Dr. Ratri parida - IIT Kharagpur, India
Dr. Waldemar Nowakowski - Kazimierz Pulaski University of Technology and Humanities, Poland
Dr. Parin Shah - Institute of Technology, Nirma University, India
Dr. Ashok Tripathi - SHIATS, Allahabad, India
Dr. H.T.Basavarajappa - University of Mysore, India
Dr. R. Dilli Babu - Department of Industrial Engineering, Anna University, Chennai-India
Dr. Nilaj N. Deshmukh - Fr.C.Rodrigues Institute of Technology, India
Dr. Wilson Udo Udofia - University of Uyo, Nigeria
Dr. Satish kumar Moparthi - Kallam Haranadha Reddy Institute of Technology, Andhra Pradesh, India
Dr. H. Erdem Çamurlu - Akdeniz University, TÜRKİYE
Dr. GIRISHA L - PES Institute of Technology and Management, Karnataka, India
Dr. M. Mubarak - Karpagam College of Engineering, Tamilnadu, India
Dr. Ahmed Daabo - University of Mosul, Mosul, Iraq
Dr. R. Sharmila - Er.Perumal Manimekalai College of Engineering, Tamilnadu, India
Dr. Mourad HEBALI - University Mustafa Stmboli, Algeria
Dr. Hao Yi - Chongqing University, China
Dr. Ahmed Kawther Hussein - Mustansiriyah University, Baghdad, Iraq
Dr. Bambang Leo Handoko - Bina Nusantara University of Indonesia
Dr. T.Phani Madhavi - Professor, Department of Civil Engineering, Bapatla Engineering College, Andhra Pradesh, India
Dr. Prateek Nigam - Bansal College of Engineering, Madhya Pradesh, India
Dr. D. Narasimhan - SASTRA Deemed University, Tamilnadu, India
Prof. Taher Anwar Tawfik - Higher Institute for Engineering, 6 October City, Egypt
Dr. Mohamed KCHAOU - College of Engineering, University of Bisha, Saudi Arabia; National Engineering School of Sfax, University of Sfax, Tunisia
Dr. A R Pradeep Kumar - Dhanalakshmi College of Engineering, Tamilnadu, India
Dr. C. Kamalanathan - GITAM Deemed to be University, Andhra Pradesh, India
Dr. Olha V. Prokopenko - International Humanitarian University, Ukraine
Dr. Iryna Bashynska - Odessa National Polytechnic University
Dr. Shahzad Ashraf - Hohai University, Changzhou Campus, China
Dr. Francesco Abbondati - Parthenope University of Napoli, Italy
Dr. Dhanasekaran S - Annamalai University, Tamil Nadu, India
Dr. Naga Swetha Pasupuleti - Associate Professor, Head – International Research & Collaborations Cell, Galgotias University, Greater Noida, India.
Prof. Ruqayah K Mohammed - Faculty Member in Civil Engineering Department, Babylon University, Iraq.
Dr. Mohamed Guendouz - Lecturer, University of Medea, Algeria
Dr. Mahdi Hosseini - Research Scientist, Department of Civil Engineering, Jawaharlal Nehru Technological University Hyderabad, India.
Dr. Hesham A. Numan - Mustansiriyah University, Faculty of Engineering, Civil Engineering Department, Baghdad, Iraq.
Dr. N. Pannirselvam - Associate Professor, Department of Civil Engineering, SRM Institute of Science and Technology, Chennai, India.
Dr. T. Kamatchi - Associate Professor, Mechanical Department, Velammal College of Engineering and Technology, Tamilnadu, India.
Dr. A.N. Jha - Department of Electrical Engineering, Indian Institute of Technology, New Delhi, India.
Prof. Isma-ae Chelong - Assistant Professor, Faculty of Science Technology and Agriculture, Yala Rajabhat University, Thailand
Prof. Ing. Giorgio Frunzio - Department of Architecture and Disease Industrial, University of Campania Luigi Vanvitelli, Italy
Dr. A. Mallikarjuna Reddy - Assoc. Professor, CSE Department, Anurag Group of Institutions(Autonomous), Hyderabad, India
Dr. Aaisha Makkar - Research Associate, International Project on Cyber Security, Punjab, India
Dr. Ravindran Mariappan - Associate Professor, (SG), Electrical and Electronics Engineering Department, National Engineering College, Kovilpatti, Tamilnadu, India
Prof. Uma Govindarajan - Professor & Head of Electrical and Electronic Engineering Department, College of Engineering Guindy, Anna University, Tamil Nadu, India
Dr. S.M.Chaware - Professor, Computer Engineering, ISO, IQAC and NBA Coordinator, Marathwada Mitramandal’s College of Engineering, Pune-India
Ms. Niharikareddy Meenigea - Data Analyst, Department of Business Administration, Virginia International University, Fairfax, VA, United States
Dr. R.Neela - Professor of Electrical Engineering, Annamalai University, Tamilnadu, India
Dr. Manikandan Parasuraman - Professor, Computer Science and Engineering Department, Malla Reddy Engineering College for Women, Maisammaguda, Secunderabad, Telangana, India.
Prof. Ravi Kumar Yeda - Scientist-G, SINT (E) Division, Defence Electronics Research Laboratory (DLRL), Naseeb Nagar, Chandrayangutta, Hyderabad, Telangana, India
Prof. L. Premalatha - Department of Electrical Engineering, VIT University, Chennai, India
Dr. Tanuja K Sarode - Professor and Head, Department of Computer Engineering, Thadomal Shahani Engineering College, Mumbai, India
Dr. MaruthuPandi Perumal - Assistant Professor, Department of Electrical and Electronics Engineering, Govt. College of Technology, Coimbatore, Tamilnadu, India
Prof. Balakrishnan Pappan - Associate Professor, Department of Electrical Engineering, Malla Reddy Engineering College for Women, Maisammaguda, Telangana, India
Dr. Sivarani Thankamony Saradadevi - Professor, Department of Electrical and Electronics Engineering, Arunachala College of Engineering for women, Anna University, Chennai, Tamilnadu, India
Dr. Moturi Satyanarayana - Professor, Department of ECE, MVGR College of Engineering (A), Vijayanagaram, Andra Pradesh, India
Dr. Gowri Manohar T - Department of Electrical & Electronics Engineering, Sri Venkateswara University College of Engineering, Tirupati, Andhra Pradesh
Dr. S. Sophia - Professor and Head, Department of Electronics and Communication Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, Tamilnadu, India
Dr. Raad N.Butris - Department of Mathematics, College of Basic Education, University of Duhok, Iraq
Dr. AshokKumar Ramaswamy - Professor, Department of Electrical Engineering, Annamalai University, Tamil Nadu, India
Prof. Adireddy Rajasekhar Reddy - Professor, Department of Computer Science and Engineering, NBKR Institute of Science and Technology, Nellore, Andhra Pradesh, India
Dr. Appini Narayana Rao - Associate Professor, Department of Computer Science and Engineering, NBKR Institute of Science and Technology, Andhra Pradesh, India
Dr. Annapurani Panaiyappan K - Associate Professor, Department of Computer Science and Engineering, SRM Institute of Science and Technology, Kattankulathur, India
Mr. Venkata Naga Satya Surendra Chimakurthi - Solutions Architect, Cognizant Technology Solutions, USA
Prof. Sandeep Chaware - Professor, IT Department Rajarshi Shahu College of Engineering, Pune, India
Dr. Vikram Mohanlal Agrawal - Assistant Professor, Computer Engineering Department, B & B Institute of Technology (SFI), Gujarat, India
Mr. Samrajyam Singu - Software Developer, Vanguard, USA
Mr. Ashok Kumar Reddy Nadikattu - Researcher/Sr. Software Engineer, Arissoft Solutions, USA
Dr. Belwin Edward Jeyaraj - Associate Professor, School of Electrical Engineering, Vellore Institute of Technology (VIT), Vellore, Tamilnadu, India
Dr. Inderjeet Kaur - Ajay Kumar Garg Engineering College, Ghiaziabad, India
Mr. Anil G. Naik - Lead Product Manager, Meta, Menlo Park, CA, USA
Mr. Venkata Ravi Kiran Kolla - Sr. Researcher and Sr. Software Engineer, Department of Information Technology, USA
Ms. Lakshmi Namratha Vempaty - Lead Data Scientist, Avis Budget Group, New Jersey, USA
Reviewer Board
Dr. Irvan Dahlan - Universiti Sains Malaysia,Malaysia
Dr. Mansour Jadid - University of Dammam, Dammam, Saudi Arabia
Dr. Nazimabdulnariman - Bauhaus Universitat Weimar,Germany
Dr. Saleh Abd El-Aleem Mohammed - Faculty of Science, Fayoum University, Fayoum, Egypt
Dr. Venkata Ragahavendra Miriampally - Adama Science & Technology University, Ethiopia
Dr. Sukumar Senthilkumar - Chon Buk National University, South Korea
Dr. Sattar J Aboud - Anglia Ruskin University, UK
Dr. M. H. Raza - Dalhousie University,Canada
Dr. Mohammed.Faisal - Nizwa College of Technology,OMAN
Dr. Dheyaa J. Kadhim - College of Engineering, University of Baghdad, Iraq
Dr. Mohammed Ali Hussain - Sri Sai Madhavi Institute of Science & Technology, India
Dr. A.K.Sen - Principal, St. Francis Institute of Technology, Mumbai University, India
Dr. Suryakant B Patil - JSPM's ICOER, Wagholi, Pune, India
Dr. A.Udayakumar - Hindustan University, India
Dr. V.Baskaran - Bannari Amman Institute of Technology, India
Dr. Uday Kumar - Mahatma Gandhi Institute of Technology, India
Dr. A. G. Matani - Govt. College of Engg, Amravati ,India
Dr. P.Muthupriya - Sri Krishna College of Technology ,Coimbatore, India
Dr. Nkolika Joy Peter - Covenant University, Nigeria
Dr. J.B. Seventiline - Professor and Assistant Principal of GITAM Institute of Technology under GITAM, Gandhi Nagar, Rushikonda, Visakhapatnam, Andhra Pradesh 530045.
Mr. Shiwen Zhao - Electrical Engineering, Nari Group Corporation Information & Communication Technology Co. Ltd, Pukou Qu, Nanjing, China
Dr. Umapathi Reddy P - Professor, Department of Electrical Engineering, Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India
Dr. Kiranmayi R - Professor & Head of Department, Department of Electrical Engineering, JNTUA, Anantapur, Andhra Pradesh, India
Dr. Bikshalu Kalagadda - Assistant Professor, Department of ECE, Kakatiya University College of Engineering and Technology (KUCET), Kakatiya University, Warangal, Telangana, India
For Authors
Paper title (14 Bold)- Capital Letter
First Author1, Second Author2 (13 Bold- Times New Roman)
1(Department, College/ University Name, Address, Country Name, Email) (12)
2(Department, College/ University Name, Address, Country Name, Email) (12)
ABSTRACT (12 Bold)
The abstract should summarize the content of the paper. Try to keep the abstract below 350 words. Do not make references nor display equations in the abstract. The journal will be printed from the same-sized copy prepared by you. Your manuscript should be printed on A4 paper (21.0 cm x 29.7 cm). It is imperative that the margins and style described below be adhered to carefully. This will enable us to keep uniformity in the final printed copies of the Journal. Please keep in mind that the manuscript you prepare will be photographed and printed as it is received. Readability of copy is of paramount importance.(12)
Keywords (12 Bold) : About five key words in alphabetical order, separated by comma (12)
I. INTRODUCTION (12 BOLD)
The introduction of the paper should explain the nature of the problem, previous work, purpose, and the contribution of the paper. The contents of each section may be provided to understand easily about the paper. (12)
II. HEADINGS (12 BOLD)
The headings and subheadings, starting with "1. Introduction", appear in upper and lower case letters and should be set in bold and aligned flush left. All headings from the Introduction to Acknowledgements are numbered sequentially using 1, 2, 3, etc. Subheadings are numbered 1.1, 1.2, etc. If a subsection must be further divided, the numbers 1.1.1, 1.1.2, etc.
The font size for heading is 12 points bold face and subsections with 12 points and not bold. Do not underline any of the headings, or add dashes, colons, etc. (12)
III. INDENTATIONS AND EQUATIONS(12 BOLD)
The first paragraph under each heading or subheading should be flush left, and subsequent paragraphs should have a five-space indentation. A colon is inserted before an equation is presented, but there is no punctuation following the equation. All equations are numbered and referred to in the text solely by a number enclosed in a round bracket (i.e., (3) reads as "equation 3"). Ensure that any miscellaneous numbering system you use in your paper cannot be confused with a reference [4] or an equation (3) designation. (12)
IV. FIGURES AND TABLES(12 BOLD)
To ensure a high-quality product, diagrams and lettering MUST be either computerdrafted or drawn using India ink.
Figure captions appear below the figure, are flush left, and are in lower case letters.When referring to a figure in the body of the text, the abbreviation "Fig." is used. Figures should be numbered in the order they appear in the text.
Table captions appear centered above the table in upper and lower case letters. When referring to a table in the text, no abbreviation is used and "Table" is capitalized. (12). Figures and tables should be included in the running text itself
V. CONCLUSION (12 BOLD)
A conclusion section must be included and should indicate clearly the advantages, limitations, and possible applications of the paper. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extentions. (12)
VI. ACKNOWLEDGEMENTS(12 Bold)
An acknowledgement section may be presented after the conclusion, if desired.( 12)
REFERENCES (12 BOLD)
This heading is not assigned a number.
A reference list MUST be included using the following information as a guide. Only cited text references are included. Each reference is referred to in the text by a number enclosed in a square bracket (i.e., [3]). References must be numbered and ordered according to where they are first mentioned in the paper, NOT alphabetically.
Examples follow:
ournal Papers:
[1] M Ozaki, Y. Adachi, Y. Iwahori, and N. Ishii, Application of fuzzy theory to writer recognition of Chinese characters, International Journal of Modelling and Simulation, 18(2), 1998, 112-116. (12)
Books:
[2] R.E. Moore, Interval analysis (Englewood Cliffs, NJ: Prentice-Hall, 1966). (12) Note that the title of the book is in lower case letters and italicized. There is no comma following the title. Place of publication and publisher are given.
Chapters in Books:
[3] P.O. Bishop, Neurophysiology of binocular vision, in J.Houseman (Ed.), Handbook of physiology, 4 (New York: Springer-Verlag, 1970) 342-366. (12) Note that the place of publication, publisher, and year of publication are enclosed in brackets. Editor of book is listed before book title.
Theses:
[4] D.S. Chan, Theory and implementation of multidimensional discrete systems for signal processing, doctoral diss., Massachusetts Institute of Technology, Cambridge, MA, 1978. (12)
Proceedings Papers:
[5] W.J. Book, Modelling design and control of flexible manipulator arms: A tutorial review, Proc. 29th IEEE Conf. on Decision and Control, San Francisco, CA, 1990, 500-506 (12)
IAEME Publication Fees
IAEME Publication charges an Article Processing Charge (APC) once an article is accepted for publication. These charges cover the costs of turning a manuscript into a finished article, as well as the costs of hosting, distributing and promoting an article.
Article Processing Charges explained
We are committed to making the costs of publishing as clear as possible and so the charges for each journal are clearly displayed on each journal`s homepage.
When a manuscript is submitted, it passes through the many different departments at Hindawi to ensure the quality checks, peer review, production and promotion of articles is carried out in a timely manner and to a high standard:
✔ The Editorial Screening team, who perform initial technical and ethical checks
✔ The Editorial team, who help the journal`s Academic Editors manage the review process
✔ The Production team, who convert the manuscript to a professionally typeset article and well-structured file format
✔ The Proofing team, who coordinate the proofing process through Hindawi`s Online Proofing System (OPS)
✔ The Editorial Quality Assurance team, who perform a final check to ensure that the manuscript and its review process adhere to the journal`s guidelines and policies
✔ Our Marketing and Communication teams, who ensure your article receives the attention it deserves.
✔ The Technology team, who build and maintain our systems, and develop new systems
The work these teams do contribute to the requirement of an APC and is why the actual amount payable varies depending on the journal in which you wish to publish your article.
IAEME Publication does not request Article Submission Charges, also called Submission Fees. These are due at the time of submission of the manuscript. Nor does IAEME charge per page or for color figures or for any other items for which other publishers are known to charge.
Sources for Article Processing Charges (APC)
Authors of an article are responsible for arranging the payment of APC. Still, that typically does not mean that authors end up paying for the publication of the article. The cost of APC is very often assumed either by the organization funding the research published in the article, or by an Open Access Publishing Fund, or by the institution at which the author is employed.
Fair Dealing - Authors and Publisher
When an author submits a manuscript for review at one of IAEME`s journals, the submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. The manuscript should also not be submitted to any other journal during the review process at IAEME Publication. In case the review process at IAEME takes much longer than stated and the author wishes to end the review process at IAEME, he/she should get in contact with the Editorial Assistant of the journal at IAEME and come to an agreement suitable for both sides after looking at the stage of the manuscript in the review process.
With the APC specified above, the author is given an indication what the APC will be. IAEME is charging Publication Fees (APC) but not Submission Fees. This is to the benefit to authors because payments are only due once the author knows the manuscript is accepted. IAEME with editors and reviewers puts much effort in dealing with the manuscript and expects the authors to stick to the common plan of publishing the paper which is linked to payments of APC as given above at the end of the review process. The author is not legally bound at this time, but it would be seen as a strong breach of academic conduct to back off from the publication process. Once the manuscript is accepted for publication, IAEME will issue an invoice in the Paper Submission and Manuscript Tracking System. This is IAEME `s legal offer and will state the regular APC of the journal. The Corresponding Author is expected to arrange payments of the amount stated at this time. In severe cases IAEME `s Complaints Procedure can be followed and the result of this should be binding to the author.
Refund Policy
Once an article has been accepted for publication, any Article Processing Charges on the article become due. The submitting author accepts responsibility for the Article Processing Charges, and will not issue refunds of any kind except those payments made by mistake or in excess of the amount required.
The topics to be covered by this journal include but are not limited to the following fields:
| • General Engineering • Decision Sciences • Earth and Planetary Sciences • Business • Management and Accounting • Biochemistry • Genetics and Molecular Biology • Environmental Science • Chemical Engineering • Electrical • Electronics and Computer Engineering |
• Information Engineering and Technology • Mechanical • Industrial and Manufacturing Engineering • Automation and Mechatronics Engineering • Material and Chemical Engineering • Civil and Architecture Engineering • Biotechnology and Bio Engineering • Environmental Engineering • Petroleum and Mining Engineering • Marine and Agriculture engineering • Aerospace Engineering |