| 1 |
IJMET_13_06_001 |
CONTROL OF EXHAUST EMISSIONS OF TWO STROKE AND FOUR STROKE COPPER COATED SPARK IGNITION ENGINES |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
13/6 |
2022 |
| 2 |
IJMET_13_02_002 |
COMPARATIVE INVESTIGATIONS ON THE PERFORMANCE PARAMETERS OF TOBACCO SEED OIL BIODIESEL IN A LOW HEAT REJECTION DIESEL ENGINE |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
13/2 |
2022 |
| 3 |
IJMET_13_06_002 |
MECHANICAL PROPERTIES OF SIC AL2O3 FILLED GLASS EPOXY COMPOSITES |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
13/6 |
2022 |
| 4 |
IJPTM_13_01_005 |
MACHINABILITY OF SiC AND AL2O3 PARTICLES FILLED SHORT GLASS FIBER REINFORCED EPOXY BASED COMPOSITES BY TURNING |
INTERNATIONAL JOURNAL OF PRODUCTION TECHNOLOGY AND MANAGEMENT (IJPTM) |
13/1 |
2022 |
| 5 |
IJMET_13_05_003 |
EXPERIMENTAL INVESTIGATIONS ON EXHAUST EMISSIONS INSULATED DIESEL ENGINE FUELLED WITH COTTONSEED BIODIESEL |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
13/5 |
2022 |
| 6 |
IJMET_13_07_001 |
EFFECT OF INJECTION PRESSURE ON EXHAUST EMISSIONS OF DIESEL ENGINE FUELLED WITH ALTERNATIVE FUELS |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
13/7 |
2022 |
| 7 |
IJMET_13_02_001 |
HEAT TRANSFER CHARACTERISTICS WITH COTTONSEED BIODIESEL ON CORRUGATED HEAT EXCHANGER |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
13/2 |
2022 |
| 8 |
IJMET_12_02_005 |
COMPARATIVE STUDIES ON CONTROL OF EMISSIONS OF TWO STROKE AND FOUR STROKE SPARK IGNITION ENGINES |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
12/2 |
2021 |
| 9 |
IJMET_12_03_001 |
INVESTIGATIONS ON REDUCTION OF EMISSIONS IN SPARK IGNITION ENGINE |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
12/3 |
2021 |
| 10 |
IJMET_12_10_001 |
REDUCTION OF POLLUTANTS FROM COPPER COATED SPARK IGNITION ENGINE WITH ALCOHOL BLENDED GASOLINE |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
12/10 |
2021 |
| 11 |
IJMET_12_10_002 |
INVESTIGATIONS ON POLLUTANTS FROM CERAMIC COATED DIESEL ENGINE WITH CARBURETED BUTANOL AND PLASTIC OIL |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
12/10 |
2021 |
| 12 |
IJMET_12_03_002 |
REDUCTION OF EXHAUST EMISSIONS OF SEMI ADIABATIC DIESEL ENGINE WITH ALTERNATIVE FUELS |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
12/3 |
2021 |
| 13 |
IJARET_12_05_005 |
A COMPACT LOW PROFILE INVERTED-F MULTI BAND ANTENNA (IFMBA) SYSTEM FOR WIFI – WLAN - WIMAX APPLICATIONS |
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) |
12/5 |
2021 |
| 14 |
IJARET_12_05_006 |
A SHARED APERTURE MULTIFUNCTION DUAL POLARIZED DUAL BAND ANTENNA FOR BASE STATION APPLICATIONS |
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) |
12/5 |
2021 |
| 15 |
IJMET_12_05_001 |
INVESTIGATIONS ON EXHAUST EMISSIONS OF HIGH GRADE LOW HEAT REJECTION DIESEL ENGINE WITH COTTON SEED BIODIESEL |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
12/5 |
2021 |
| 16 |
JECET_03_01_001 |
LNA DESIGN FOR 5G APPLICATIONS |
JOURNAL OF ELECTRONICS AND COMMUNICATION ENGINEERING AND TECHNOLOGY (JECET) |
3/1 |
2021 |
| 17 |
IJEET_12_05_010 |
A SMART PARKING SYSTEM USING M2M COMMUNICATION |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
12/5 |
2021 |
| 18 |
IJPTM_11_01_002 |
EXPERIMENTAL INVESTIGATIONS ON SEMIADIABATIC DIESEL ENGINE WITH EXHAUST GAS RECIRCULATION FUELLED WITH TAMARIND BOIDIESEL |
INTERNATIONAL JOURNAL OF PRODUCTION TECHNOLOGY AND MANAGEMENT (IJPTM) |
11/1 |
2020 |
| 19 |
IJPTM_11_01_003 |
EXPERIMENTAL INVESTIGATIONS ON EXHAUST EMISSIONS WITH BIODIESEL BLENDED WITH NANO PARTICLES IN CI ENGINE |
INTERNATIONAL JOURNAL OF PRODUCTION TECHNOLOGY AND MANAGEMENT (IJPTM) |
11/1 |
2020 |
| 20 |
IJEET_11_04_016 |
PERFORMANCE COMPARISON OF TECHNIQUES FOR INTERFERENCE COORDINATION IN HETNETS OF LTE-A |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
11/4 |
2020 |
| 21 |
IJARET_11_12_185 |
TIMELINE BASED TRUST DISSEMINATION TOWARDS REVIEW SPAM DETECTION IN ONLINE REVIEWS |
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) |
11/12 |
2020 |
| 22 |
IJEET_11_04_018 |
INVERSE DEFINITE MINIMUM TIME RELAY COORDINATION IN RADIAL TRACTION SYSTEM |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
11/4 |
2020 |
| 23 |
IJEET_11_04_028 |
PERFORMANCE EVALUATION OF DC ELECTRIC SPRING PLACED IN MICRO GRID SYSTEMS USING SOLAR PV EMULATOR |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
11/4 |
2020 |
| 24 |
IJMET_11_10_003 |
EXPERIMENTAL INVESTIGATIONS ON INJECTION TIMING VARIATION AT AN INJECTOR OPENING PRESSURE OF 190BAR ON SEMI- ADIABATIC DIESEL ENGINE WITH EXHAUST GAS RECIRCULATION |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
11/10 |
2020 |
| 25 |
IJEET_11_05_006 |
REVIEW ON DIFFERENT CONTROL METHODS USED FOR INDUCTION HEATING APPLICATIONS |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
11/5 |
2020 |
| 26 |
IJEET_10_02_012 |
THERMAL ANALYSIS ON POWER TRANSFORMER |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
10/2 |
2019 |
| 27 |
IJPTM_10_01_005 |
APPLICATION OF GENETIC ALGORITHMS FOR MODELLING THE EDM PARAMETERS ON MACHINING OF AISI 4340 STEEL |
INTERNATIONAL JOURNAL OF PRODUCTION TECHNOLOGY AND MANAGEMENT (IJPTM) |
10/1 |
2019 |
| 28 |
IJMET_10_03_139 |
FINITE ELEMENT ANALYSIS OF POWER TRANSFORMER |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
10/3 |
2019 |
| 29 |
IJMET_10_05_009 |
THERMAL ANALYSIS OF MODIFIED COMBUSTION CHAMBER OF SPARK IGNITION ENGINE |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
10/5 |
2019 |
| 30 |
IJAE_01_01_003 |
FINITE ELEMENT ANALYSIS OF POWER TRANSFORMER |
INTERNATIONAL JOURNAL OF APPLIED ELECTRONICS (IJAE) |
1/1 |
2019 |
| 31 |
IJARET_10_02_040 |
OPTIMIZATION OF HEURISTIC ALGORITHMS FOR IMPROVING BER OF ADAPTIVE TURBO CODES |
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) |
10/2 |
2019 |
| 32 |
IJMET_09_01_006 |
EXPLORATION ON POWER DELAY PRODUCT OF VARIOUS VLSI MULTIPLIER ARCHITECTURES |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
9/1 |
2018 |
| 33 |
IJMET_09_03_044 |
UTILIZATION OF BEND-TWIST COUPLING TO IMPROVE THE PERFORMANCE OF HYBRID MARINE COMPOSITE PROPELLER |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
9/3 |
2018 |
| 34 |
IJMET_09_07_061 |
THREE PHASE GRID CONNECTED PV SYSTEM WITH LVRT CONTROL STRATEGY |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
9/7 |
2018 |
| 35 |
IJEET_09_03_014 |
NATURE INSPIRED OPTIMIZATION ALGORITHMS IN ARTIFICIAL NEURAL NETWORK FOR SPEAKER RECOGNITION |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
9/3 |
2018 |
| 36 |
IJEET_09_03_015 |
IOT BASED SMART VEHICLE AND SMART PARKING SYSTEM |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
9/3 |
2018 |
| 37 |
IJEET_09_02_002 |
EVALUATION OF INDUCTION MOTOR PERFORMANCE FOR THREE DIFFERENT DIODE CLAMPED MULTI LEVEL INVERTERS |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
9/2 |
2018 |
| 38 |
IJCIET_09_07_119 |
DEVELOPMENT OF SELF-CURING CONCRETE USING POLYETHYLENE GLYCOL AS INTERNAL CURING AGENT |
INTERNATIONAL JOURNAL OF CIVIL ENGINEERING AND TECHNOLOGY (IJCIET) |
9/7 |
2018 |
| 39 |
IJMET_09_04_039 |
SPWM BASED MATRIX CONVERTER FOR INDUSTRIAL APPLICATION-MATLAB SIMULATION |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
9/4 |
2018 |
| 40 |
IJMET_09_03_081 |
EFFECT OF STACKING SEQUENCE ON THE PERFORMANCE OF GAS TURBINE CASING USING MODAL ANALYSIS |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
9/3 |
2018 |
| 41 |
IJEET_09_01_006 |
CURRENT MODE CONTROL METHOD USED FOR LLC RESONANT DC-DC CONVERTER SUITABLE FOR PORTABLE APPLICATIONS |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
9/1 |
2018 |
| 42 |
IJMET_08_05_076 |
EXPERIMENTAL INVESTIGATIONS ON PERFORMANCE PARAMETERS AND COMBUSTION CHARACTERISTICS OF LOW HEAT REJECTION DIESEL ENGINE WITH PREHEATED COTTONSEED BIODIESEL WITH VARIED INJECTION PRESSURE |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
8/5 |
2017 |
| 43 |
IJEET_08_02_012 |
CONTROL METHOD FOR LCC CURRENT OUTPUT RESONANT CONVERTER |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
8/2 |
2017 |
| 44 |
IJEET_08_04_010 |
MONTE – CARLO ANALYSIS OF CYLINDRICAL PARTICLE DISLODGEMENT IN POWER TRANSFORMER |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
8/4 |
2017 |
| 45 |
IJEET_08_05_005 |
REVIEW ON DIFFERENT LOAD RESONANT CONVERTERS SUITABLE FOR DISTRIBUTED POWER SYSTEM (DPS) |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
8/5 |
2017 |
| 46 |
IJEET_08_06_005 |
NEW CONTROL STRATEGY FOR LLC RESONANT CONVERTER USED IN DISTRIBUTED POWER SYSTEM (DPS) |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
8/6 |
2017 |
| 47 |
IJCET_08_01_003 |
TRACKING MULTI-TARGETS WITH UNIFIED HANDLING OF VIDEO |
INTERNATIONAL JOURNAL OF COMPUTER ENGINEERING AND TECHNOLOGY (IJCET) |
8/1 |
2017 |
| 48 |
IJEET_08_01_011 |
DEVELOPMENT OF 13 LEVEL CASCADED H BRIDGE MULTILEVEL INVERTER MATLAB SIMULATION |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
8/1 |
2017 |
| 49 |
IJMET_08_06_059 |
EFFECT OF WELDING PARAMETERS ON MECHANICAL PROPERTIES OF FRICTION STIR WELDED JOINTS OF AA6082 AND AA6061 ALUMINIUM ALLOYS |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
8/6 |
2017 |
| 50 |
IJEET_07_03_003 |
ANALYSIS OF VARIOUS COMPENSATION DEVICES FOR POWER QUALITY IMPROVEMENT IN WIND ENERGY SYSTEM |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
7/3 |
2016 |
| 51 |
IJMET_07_01_014 |
EFFECT OF INJECTION PRESSURE ON PERFORMANCE PARAMETERS AND COMBUSTION CHARACTERISTICS OF HIGH GRADE SEMI ADIABATIC DIESEL ENGINE WITH COTTON SEED BIODIESEL |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
7/1 |
2016 |
| 52 |
IJITMIS_07_01_002 |
ENERGY-AWARE TRUSTABLE MULTIHOP ROUTING (ETMR) PROTOCOL TO SUPPORT HIGH AMOUNT OF DATA TRANSFERS IN AD-HOC NETWORKS |
INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY AND MANAGEMENT INFORMATION SYSTEMS (IJITMIS) |
7/1 |
2016 |
| 53 |
IJECET_07_01_004 |
PERFORMANCE ANALYSIS OF CLIPPED STBC CODED MIMO OFDM SYSTEM |
INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATION ENGINEERING AND TECHNOLOGY (IJECET) |
7/1 |
2016 |
| 54 |
IJETR_04_04_003 |
COMPARISON OF MECHANICAL PROPERTIES OF AlSiMg ALLOY WITH VARIED COMPOSITION |
INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY RESEARCH (IJETR) |
4/4 |
2016 |
| 55 |
IJEET_07_03_016 |
INVESTIGATION OF SHAPE FACTOR OF COPPER PARTICLE IN EHV TRANSFORMER UNDER DIRECTED OIL FLOW |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
7/3 |
2016 |
| 56 |
IJEET_07_04_003 |
INVESTIGATION OF FLOW PATTERN OF COPPER AND ALUMINUM PARTICLE IN EHV TRANSFORMER |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
7/4 |
2016 |
| 57 |
IJMET_07_01_006 |
EXPERIMENTAL INVESTIGATIONS ON PERFORMANCE PARAMETERS OF HIGH GRADE SEMI ADIABATIC DIESEL ENGINE WITH COTTON SEED BIODIESEL |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
7/1 |
2016 |
| 58 |
IJEET_06_09_005 |
VERSATILE CONTROL USED FOR LLC RESONANT CONVERTER SUITABLE FOR PORTABLE APPLICATIONS |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
6/9 |
2015 |
| 59 |
IJARET_06_11_007 |
HEAT TRANSFER STUDIES IN WAVY CORRUGATED PLATE HEAT EXCHANGERS |
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) |
6/11 |
2015 |
| 60 |
IJMET_06_06_013 |
CONTROL OF POLLUTANTS WITH CATALYTIC CONVERTER AND COPPER COATED CYLINDER HEAD IN METHANOL- GASOLINE BLEND OPERATED TWO STROKE SI ENGINE |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
6/6 |
2015 |
| 61 |
IJEET_06_09_004 |
FEASIBILITY OF HYBRID RENEWABLE SYSTEM FOR GRID FREE REMOTE VILLAGES - A CASE STUDY |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
6/9 |
2015 |
| 62 |
IJMET_06_12_006 |
PRESSURE DROP STUDIES IN WAVY CORRUGATED PLATE HEAT EXCHANGERS |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
6/12 |
2015 |
| 63 |
IJMET_05_07_003 |
STUDIES ON EXHAUST EMISSIONS FROM CERAMIC COATED DIESEL ENGINE WITH WASTE FRIED VEGETABLE OIL BASED BIODIESEL |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
5/7 |
2014 |
| 64 |
IJMET_05_12_014 |
COMPARATIVE STUDIES ON PERFORMANCE PARAMETERS OF TWO STROKE SPARK IGNITION ENGINE WITH COPPER COATED PISTON WITH METHANOL BLENDED GASOLINE |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
5/12 |
2014 |
| 65 |
40120140508006 |
A NOVEL CMOS MODEL DESIGN FOR 2-6 GHz WIDEBAND LNA INPUT MATCHING USING RESISTIVE FEEDBACK TOPOLOGY FOR WIMAX APPLICATIONS |
INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATION ENGINEERING AND TECHNOLOGY (IJECET) |
5/8 |
2014 |
| 66 |
IJMET_05_04_001 |
STUDIES ON CONTROL OF ALDEHYDES FROM FOUR STROKE COPPER COATED SPARK IGNITION ENGINE WITH METHANOL BLENDED GASOLINE WITH IMPROVED DESIGN OF CATALYTIC CONVERTER |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
5/4 |
2014 |
| 67 |
IJMET_05_06_009 |
STUDIES ON EXHAUST EMISSIONS OF DIESEL ENGINE WITH CERAMIC COATED COMBUSTION CHAMBER WITH CARBURETED METHANOL AND CRUDE JATROPHA OIL |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
5/6 |
2014 |
| 68 |
IJCIET_05_03_031 |
STUDIES ON COMPRESSION AND FLEXURAL STRENGTH CHARACTERISTICS OF TRIPLE BLENDED HIGH STRENGTH RECYCLED AGGREGATE CONCRETE |
INTERNATIONAL JOURNAL OF CIVIL ENGINEERING AND TECHNOLOGY (IJCIET) |
5/3 |
2014 |
| 69 |
IJMET_05_09_043 |
BEND-TWIST COUPLING AND ITS EFFECT ON CAVITATION INCEPTION OF COMPOSITE MARINE PROPELLER |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
5/9 |
2014 |
| 70 |
IJMET_05_09_044 |
STUDIES ON EXHAUST EMISSIONS OF CERAMIC COATED DI DIESEL ENGINE FUELLED WITH COTTON SEED BIODIESEL |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
5/9 |
2014 |
| 71 |
IJMET_05_04_009 |
STUDIES ON EXHAUST EMISSIONS OF A FOUR-STROKE COPPER COATED SPARK IGNITION ENGINE WITH GASOHOL WITH IMPROVED DESIGN OF A CATALYTIC CONVERTER |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
5/4 |
2014 |
| 72 |
IJMET_05_05_005 |
INFLUENCE OF INJECTOR OPENING PRESSURE ON EXHAUST EMISSIONS IN DI DIESEL ENGINE WITH THREE LEVELS OF INSULATION WITH DIESEL OPERATION |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
5/5 |
2014 |
| 73 |
IJMET_05_09_051 |
STUDIES ON PERFORMANCE PARAMETERS AND EXHAUST EMISSIONS OF CRUDE MAHUA OIL IN MEDIUM GRADE LOW HEAT REJECTION DIESEL ENGINE |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
5/9 |
2014 |
| 74 |
40220130405002 |
VOLTAGE STABILITY IMPROVEMENT USING STATIC SYNCHRONOUS SERIES COMPENSATOR (SSSC) USING PI CONTROLLER |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
4/5 |
2013 |
| 75 |
IJARET_04_05_019 |
ENHANCEMENT OF VOLTAGE STABILITY USING STATIC SYNCHRONOUS SERIES COMPENSATOR (SSSC) WITH PI CONTROLLER-LLLG FAULT |
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) |
4/5 |
2013 |
| 76 |
IJCET_03_01_033 |
AN EFFICIENT METHOD-LEVEL CODE CLONE DETECTION SCHEME THROUGH TEXTUAL ANALYSIS USING METRICS |
INTERNATIONAL JOURNAL OF COMPUTER ENGINEERING AND TECHNOLOGY (IJCET) |
3/1 |
2012 |
| 77 |
IJMET_03_02_047 |
DESIGN OF HYBRID POWER GENERATION USING SOLAR TRACKING PV MODULE AND WIND TURBINE |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
3/2 |
2012 |
| 78 |
IJEET_03_02_033 |
A NOVEL APPROACH IN DESIGNING A FILTER FOR A SOLID ROTOR ALTERNATOR TO MINIMISE HARMONICS |
INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING AND TECHNOLOGY (IJEET) |
3/2 |
2012 |
| 79 |
IJMET_03_02_058 |
COMBINED HEAT AND MASS TRANSFER IN MHD THREE-DIMENSIONAL POROUS FLOW WITH PERIODIC PERMEABILITY AND HEAT ABSORPTION |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
3/2 |
2012 |
| 80 |
IJMET_03_02_060 |
INFLUENCE OF VISCOSITY ON FLUID PRESSURE IN HYDROFORMING DEEP DRAWING PROCESS |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
3/2 |
2012 |
| 81 |
IJMET_01_01_006 |
IMPACT OF VOLTAGE ON AUSTENTIC STAINLESS STEEL FOR THE PROCESS OF TIG AND MIG WELDING |
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) |
1/1 |
2010 |
Call For Paper December - 2023
Submit Online
